Field reference for GS2AH250 TeSys GS external rotary handle
Use GS2AH250 as the exact identifier when requesting this TeSys GS external rotary handle. The category image is a shared reference illustration, not an exact photograph of the particular GS2AH250 variant. The nameplate and current manufacturer documentation govern the installed item.
Technical identification
| Technical item | Verified value / selection note |
|---|---|
| Exact requested code | GS2AH250 |
| Product identity | TeSys GS external rotary handle |
| Function | External rotary handle for switch-disconnector |
| Positions | I / O |
| Handle colour | Black |
| Ingress protection | IP65 family configuration; confirm assembled enclosure |
Commissioning checkpoint
Install GS2AH250 only after the applicable isolation and safety procedure. Verify mounting, terminals, electrical supply or signal levels, and functional response relevant to TeSys GS external rotary handle. Record test results and the as-fitted designation GS2AH250 for later maintenance.
Before removal
For an installed GS2AH250, record the panel location, connected circuit, terminal labels and the operating state. Photograph the GS2AH250 nameplate and assembly before disconnecting anything. Check the host GS frame, shaft arrangement and enclosure clearance. A physically similar device may use a different rating or contact arrangement.
Order and receiving check
State GS2AH250 in the enquiry and purchase line, together with quantity, destination and required documents. When GS2AH250 arrives, compare its printed code, packaging, accessories and revision with the approved order. Do not accept a neighboring suffix as equivalent without an engineering review.
Configuration notes
The reference GS2AH250 should remain attached to drawings, settings and service records. If GS2AH250 is part of a larger starter, switch, sensor or UPS assembly, check every host component and accessory as well as this individual code. A catalogue family name alone does not identify a fully configured assembly.
For a replacement request, compare the existing GS2AH250 against the offered GS2AH250 documentation: dimensions, electrical duty, interface and regional certification can all matter. Record any approved variation explicitly so the next technician does not treat visual resemblance as evidence of interchangeability.
Visually similar model references
No unassigned code with the GS2AH visual pattern is grouped here. This does not mean that GS2AH250 has no variants; ask for an exact designation when a substitute is proposed.
Handover record
Retain the quotation, approval, installation test and final GS2AH250 nameplate record. When the next service cycle starts, specify GS2AH250 in full and review the real duty before ordering. The shared image does not replace a technical review of GS2AH250.
