CR1F150M7 application record: TeSys F magnetic-latching contactor identity and fit
CR1F150M7 is an exact Schneider Electric reference for TeSys F magnetic-latching contactor. This page combines confirmed catalog identity with practical purchasing and installation questions. The shared category collage is a reference image and should not be read as an exact photograph of the delivered CR1F150M7.
CR1F150M7 technical data
| Technical item | Verified value / selection note |
|---|---|
| Exact model | CR1F150M7 |
| Confirmed product identity | TeSys F magnetic-latching contactor |
| Main poles | 3 normally open |
| AC-3 current | 150 A at up to 440 V |
| Control coil | 220–230 V DC |
Application decision
The CR1F150M7 selection should answer a specific field question: Check the pulse-operated latch circuit rather than treating it as a standard contactor. Compare the complete CR1F150M7 code with the machine or panel schedule and secure any needed accessory references.
Three buyer questions
Is CR1F150M7 the complete ordering code?
Compare the full CR1F150M7 label with the purchase record, not just the first characters or the appearance of a category picture.
Will CR1F150M7 fit the actual circuit?
Review the CR1F150M7 ratings, connection scheme, mounted position and operating duty against the latest approved equipment drawing.
What must accompany CR1F150M7?
Check terminals, operators, bases, accessories and any firmware or configuration items separately for the selected CR1F150M7 application.
Procurement and handover
Issue the CR1F150M7 inquiry with quantity, destination, site voltage or signal, installed reference, equipment tag and requested documentation. Where CR1F150M7 is a legacy item, ask for current regional availability. Any proposed successor requires a documented functional and mechanical comparison, not an assumption of drop-in compatibility.
Before fitting CR1F150M7, qualified personnel should isolate the appropriate circuit, photograph the previous arrangement, label conductors and preserve the controller or drive settings when relevant. Commission CR1F150M7 against the approved design and record functional checks, alarms and delivered nameplate.
Close-looking model codes
The 8 codes below share a visible CR1F pattern with CR1F150M7. They are indexed on this representative page instead of receiving separate pages. Similar appearance does not show that any listed code is electrically, mechanically or functionally interchangeable with CR1F150M7.
Acceptance record
Confirm the exact CR1F150M7 code, approved rating or signal, mounting and connection, and all necessary accessories. Keep the CR1F150M7 order record with the inspection and commissioning evidence so the next service team can trace what was installed.
