BMXNGD0100 product identity, ratings and installation decision
The BMXNGD0100 designation identifies a Schneider Electric Modicon M580 Ethernet Global Data module. This field record puts the confirmed BMXNGD0100 facts first, then the checks needed to release an order. The reused main-image collage is a category reference, not a photograph of the exact BMXNGD0100 unit.
Technical data / confirmed identity
| Technical item | Verified value / selection note |
|---|---|
| Complete code | BMXNGD0100 |
| Equipment type | Modicon M580 Ethernet Global Data module |
| Network | Ethernet TCP/IP |
| Service | Global Data |
| Platform | Modicon M580 |
01 — Define the existing installation
Record the installed BMXNGD0100 label in full, the equipment tag, and any serial number, firmware or mechanical revision relevant to the assembly. A partial BMXNGD0100 designation does not establish compatibility.
Identify the supply, load, mating part, terminals, environment and available space before specifying BMXNGD0100. Keep a photograph of the original label and the cabinet or machine drawing with the inquiry.
02 — Decide whether the reference fits
Validate CPU firmware, network architecture and data-exchange configuration.
Compare the BMXNGD0100 parameters above with the actual circuit or machine duty. If the previous item has a different suffix, contact set, rating or enclosure, the proposed BMXNGD0100 must be reviewed as an engineered change.
03 — Install and document the result
Only qualified personnel should fit BMXNGD0100 after site isolation. Preserve settings and software backups where they apply to BMXNGD0100; label wiring before removal and use current manufacturer instructions for the final connection.
Functional testing of BMXNGD0100 should cover the intended switching, signal, drive or protection response and any alarms. Record measured values and the final BMXNGD0100 designation. Safety-related parts require validation of the complete function.
Similar-looking catalog codes
The 13 codes below resemble BMXNGD0100 through their BMXN pattern and are covered on this representative page. They are not separate pages in this publishing set. Similar code shape is not proof that a listed code can replace BMXNGD0100; compare the exact options and ratings.
Final release check
Before buying BMXNGD0100, confirm its current manufacturer datasheet, actual delivered nameplate, regional availability and any lifecycle notice. Retain the BMXNGD0100 technical review, accessory list and commissioning results for later maintenance.
