BCH2MM1523CA6C servo motor: mechanical fit and drive pairing
A request for BCH2MM1523CA6C should identify the installed equipment and the intended duty. The facts below distinguish BCH2MM1523CA6C from similar-looking references. The picture is shared across this product category and does not depict a guaranteed BCH2MM1523CA6C configuration.
Verified product data
| Technical item | Verified value / selection note |
|---|---|
| Complete reference | BCH2MM1523CA6C |
| Product family | Lexium 28 servo motor |
| Power | 1500 W nominal class |
| Frame | 130 mm class |
| Shaft / seal | Keyed shaft with oil seal |
Fit assessment
Match the motor to the Lexium drive, feedback cable, brake requirement and mechanical coupling. A similar BCH2 code may alter shaft or connector details.
For BCH2MM1523CA6C, verify the actual supply, mating equipment and duty cycle. A family name is useful for search, but the complete BCH2MM1523CA6C suffix and installed configuration control the purchase decision.
Commissioning points
- Record the old BCH2MM1523CA6C label, wiring and settings. Record the axis configuration and motor identification before removal. Align the coupling, inspect cable strain and validate homing and travel limits after fitting.
- Compare the offered BCH2MM1523CA6C with the manufacturer's current technical description, accessories and lifecycle information. Test the installed function under the site's approved procedure.
Procurement review
What should the order include?
Quote the exact BCH2MM1523CA6C designation, quantity, panel or machine identifier, supply and interface details. Attach a clear photo of the original label and the mating equipment.
Can a nearby model replace it?
Treat another code as a proposed alternative to BCH2MM1523CA6C, not an automatic substitute. Compare electrical ratings, terminals, mechanical dimensions, certification and programming before approval.
How is the installation accepted?
For BCH2MM1523CA6C, retain the as-found configuration, confirm the delivered reference and document a functional test. Where protection or safety is involved, use the applicable qualified validation process.
Other look-alike order codes
No unassigned, sufficiently similar code was available to group with BCH2MM1523CA6C in this selection. Do not infer equivalence from a common visual form.
Final order check
Confirm the printed BCH2MM1523CA6C code, current Schneider Electric or Clipsal documentation, the site's supply and environmental conditions, and the required accessories before committing to BCH2MM1523CA6C. Keep this technical review with the purchase record for BCH2MM1523CA6C.
