ATV610C11N4 application questions for the Easy Altivar 610 variable-speed drive
ATV610C11N4 is the complete Schneider Electric ordering designation for the Easy Altivar 610 variable-speed drive. The category main image is a shared reference collage, not an exact photograph of ATV610C11N4. The points below separate manufacturer-supported specifications from site-specific choices.
Technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete model | ATV610C11N4 |
| Product identity | Easy Altivar 610 variable-speed drive |
| Motor power | 110 kW / 150 hp |
| Supply | Three-phase 380–460 V AC |
| Protection | IP20 class |
What does ATV610C11N4 identify?
The ATV610C11N4 code identifies the product type and variant described in the table. Keep every character of ATV610C11N4 in purchasing and maintenance records. A partial code or similar photograph cannot establish an exact replacement.
Which application checks matter for ATV610C11N4?
Confirm motor current, cabinet cooling, power wiring and saved parameters.
Before releasing ATV610C11N4, compare the installed supply, load, enclosure, terminals, network or mechanical interface as applicable. Match the actual ATV610C11N4 nameplate and panel drawing to the current manufacturer data. Include any required accessory as a separate line item.
How should ATV610C11N4 be installed and tested?
Qualified personnel should isolate the equipment under site procedure, record the original wiring and configuration, then fit ATV610C11N4 according to the relevant instructions. Preserve any software backup or settings associated with ATV610C11N4.
After installation, test the intended operating sequence and record measured values, indications, alarms and the delivered ATV610C11N4 reference. For a protection or safety component, ATV610C11N4 must be validated within the complete application; the part code alone does not prove compliance.
Related-looking codes grouped with this representative
These 9 unassigned codes share the visible ATV610 pattern with ATV610C11N4. They are included on this representative page and are not queued as separate product pages. Their technical specifications may differ from ATV610C11N4; check the full code before substitution.
Final procurement note
Confirm the availability and regional lifecycle of ATV610C11N4, the current datasheet revision and the delivered label. Keep the ATV610C11N4 selection decision with the installation record so a later service team can reconstruct why this exact item was ordered.
