Procurement brief for A9Z64425 Acti9 iID type B-SI RCCB
A9Z64425 is a specific Schneider Electric Acti9 iID type B-SI RCCB reference. The category collage used as its main picture is a shared reference image, not an exact photo of A9Z64425. The facts below are tied to the stated code; the actual installation still needs a fit review.
Technical specification
| Technical item | Verified value / selection note |
|---|---|
| Exact designation | A9Z64425 |
| Manufacturer product identity | Acti9 iID type B-SI RCCB |
| Poles | 4 |
| Rated current | 25 A |
| Residual-current protection | 300 mA, type B-SI |
The buying decision
For A9Z64425, the main procurement decision is: Check four-pole isolation and separate overcurrent protection. Confirm the proposed A9Z64425 against the installed nameplate and the current manufacturer documentation. Similar codes may use different ratings or interfaces.
Purchase and installation matrix
| Technical item | Verified value / selection note |
|---|---|
| Existing installation | Record the installed A9Z64425 code, equipment tag and panel or machine drawing. |
| Electrical or signal match | Compare A9Z64425 voltage, current, signal or safety duty to the application. |
| Mechanical and accessory fit | Check A9Z64425 terminals, mounting, operators, bases and available space. |
| Acceptance evidence | Retain the delivered A9Z64425 label, settings and functional test record. |
Questions for the supplier
Quote the complete A9Z64425 designation, quantity, destination and expected documentation. Ask whether A9Z64425 needs a separate terminal block, protective accessory, operator, network adaptor or configuration license for the proposed installation.
Ask about the current regional lifecycle of A9Z64425. If an alternative is offered, compare its function, ratings, mounting and wiring against A9Z64425; do not equate an official replacement recommendation with automatic drop-in interchangeability.
Commissioning and traceability
Qualified personnel should isolate the circuit before handling A9Z64425, mark as-found wiring, preserve settings where relevant and test the finished installation against the approved design. File the delivered A9Z64425 code, program or parameter changes and acceptance measurements together.
Visually similar codes
The 4 unassigned codes below resemble A9Z64425 by the visible A9Z pattern. They are indexed on this representative page and will not receive separate pages in this batch. They are not asserted to be interchangeable with A9Z64425; check each complete code.
Release note
Release the order only when A9Z64425 identity, application fit, accessories and availability have been checked. Keep the A9Z64425 technical and acceptance record accessible for future maintenance; a picture or abbreviated code is not sufficient evidence.
