Field-service record for Schneider A9S70763 Acti9 iSW NA switch-disconnector
A9S70763 identifies a Schneider Electric Acti9 iSW NA switch-disconnector. This service note separates confirmed A9S70763 catalog facts from site-dependent checks. The main collage is a shared category reference image, not a claim that it depicts the exact A9S70763 unit.
Key technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete reference | A9S70763 |
| Product family | Acti9 iSW NA switch-disconnector |
| Poles | 3P+N |
| Rated current | 63 A |
| Rated voltage | 415 V AC |
Four-step field sequence
- 1. Identify Photograph the complete A9S70763 nameplate and installed assembly. Capture the equipment tag and verify that A9S70763 is the intended ordering reference.
- 2. Compare Match A9S70763 electrical or signal ratings, mounting, terminal positions and associated devices with the approved drawing. Check isolation duty, neutral switching and enclosure fit.
- 3. Prepare For A9S70763, isolate the relevant circuit, label wiring and save settings or network configuration when the product carries them.
- 4. Test Commission A9S70763 under the site's safe procedure. Record operation, indication, alarms and any configuration or protection settings.
Ordering record
The A9S70763 order should carry the full code, quantity, equipment ID, operating environment and separately required accessories. Before approving A9S70763, compare the delivered manufacturer's documentation and nameplate with the installed duty.
When A9S70763 is installed in an older system, preserve the as-found wiring, firmware, drive parameters or controller program as applicable. A modern substitute for A9S70763 may require changes to mechanical fit, signaling or commissioning; test those changes at system level.
Related visual-code references
No still-unassigned close-looking A9S7 item is grouped under A9S70763. Review any alternative code against its own technical information before purchase.
Handover and acceptance
Record the delivered A9S70763 label, approved settings, wiring checks and functional result. Keep the A9S70763 decision with the site's service history. This makes future maintenance traceable without assuming that a visually similar part is the same product.
