A9K24102 application checklist for Acti9 iK60N miniature circuit breaker
This A9K24102 application note identifies a Schneider Electric Acti9 iK60N miniature circuit breaker and turns the confirmed catalog data into practical acceptance checks. The shared category collage is a reference illustration, not an exact photo of the A9K24102 variant.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | A9K24102 |
| Equipment | Acti9 iK60N miniature circuit breaker |
| Poles | 1 |
| Current / curve | 2 A, C curve |
| Breaking capacity | 6000 A under IEC/EN 60898-1 |
Before ordering
- Read the full A9K24102 nameplate and record the installed equipment tag.
- Compare A9K24102 electrical rating, mounting and mating components with the approved drawing.
- Check A9K24102 settings or accessory requirements before releasing the purchase order.
The A9K24102 code should be copied in full into the RFQ. Check prospective fault current and conductor protection. The quoted A9K24102 should also be checked against current regional manufacturer documentation, because lifecycle or accessory availability can vary by market.
Interface and installation review
Assess the A9K24102 interface in the actual assembly: supply source, load, terminals, mounting envelope, ambient conditions and any communication or feedback wiring. This review is important when a similar-looking code is proposed in place of A9K24102.
Before changing A9K24102, photograph the existing wiring and labels. Save software or parameter backups where applicable. Installation of A9K24102 must follow site isolation procedures and the manufacturer's instructions; safety functions require complete-system validation.
Acceptance evidence
After installation, compare the delivered A9K24102 nameplate to the approved order, then document wiring checks and the intended operational response. Record test results, the exact A9K24102 designation and any companion parts for maintenance.
A successful visual match is not enough to approve A9K24102. If a contact arrangement, current rating, communication protocol or mechanical fit differs, treat the change as an engineering review before energization.
Other similar-looking references
The following 3 codes share the visible A9K2 pattern with A9K24102. They are indexed here instead of being issued as separate product pages in this set. A similar string is not an interchangeability claim; each code needs its own option and rating check.
Procurement release
Release the A9K24102 order only with its full designation, required accessories, approved fit decision and current product data. Keep the A9K24102 commissioning record linked to the equipment tag.
