A9D11220 application checklist for Acti9 iC60H2 earth-leakage circuit breaker
This A9D11220 application note identifies a Schneider Electric Acti9 iC60H2 earth-leakage circuit breaker and turns the confirmed catalog data into practical acceptance checks. The shared category collage is a reference illustration, not an exact photo of the A9D11220 variant.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | A9D11220 |
| Equipment | Acti9 iC60H2 earth-leakage circuit breaker |
| Poles | 2 |
| Current / curve | 20 A, C curve |
| Residual sensitivity | 30 mA |
Before ordering
- Read the full A9D11220 nameplate and record the installed equipment tag.
- Compare A9D11220 electrical rating, mounting and mating components with the approved drawing.
- Check A9D11220 settings or accessory requirements before releasing the purchase order.
The A9D11220 code should be copied in full into the RFQ. Confirm system earthing, selectivity and fault level. The quoted A9D11220 should also be checked against current regional manufacturer documentation, because lifecycle or accessory availability can vary by market.
Interface and installation review
Assess the A9D11220 interface in the actual assembly: supply source, load, terminals, mounting envelope, ambient conditions and any communication or feedback wiring. This review is important when a similar-looking code is proposed in place of A9D11220.
Before changing A9D11220, photograph the existing wiring and labels. Save software or parameter backups where applicable. Installation of A9D11220 must follow site isolation procedures and the manufacturer's instructions; safety functions require complete-system validation.
Acceptance evidence
After installation, compare the delivered A9D11220 nameplate to the approved order, then document wiring checks and the intended operational response. Record test results, the exact A9D11220 designation and any companion parts for maintenance.
A successful visual match is not enough to approve A9D11220. If a contact arrangement, current rating, communication protocol or mechanical fit differs, treat the change as an engineering review before energization.
Other similar-looking references
No unassigned close-looking code is grouped under A9D11220. Review manufacturer documentation before considering another designation.
Procurement release
Release the A9D11220 order only with its full designation, required accessories, approved fit decision and current product data. Keep the A9D11220 commissioning record linked to the equipment tag.
