A9C15916 auxiliary contact block for Acti9 iCT status indication
Selecting A9C15916 starts with the complete code, not a similar-looking faceplate. As a Acti9 iACTs auxiliary contact, A9C15916 must be checked against the host equipment, supply and intended function. The main image is a shared category reference rather than an exact A9C15916 image.
Reference and rating snapshot
| Technical item | Verified value / selection note |
|---|---|
| Exact ordering code | A9C15916 |
| Product family | Acti9 iACTs auxiliary contact |
| Device role | 2 normally open auxiliary indication contacts |
| Host | Compatible Acti9 iCT contactor; verify exact host |
| Control range | 24–240 V AC / 24–130 V DC class; verify circuit |
Before energizing or commissioning
Trace the indication and interlock conductors before removal. Verify contact state with the host released and energized, and do not treat the auxiliary contacts as motor-power poles.
For A9C15916, compare the exact nameplate, wiring diagram and manufacturer literature before allowing a substitution. A close-looking suffix can change ratings, interface or delivered components.
What to confirm on the installed unit
This is an auxiliary for a modular contactor, not a breaker or a contactor by itself. Confirm the exact iCT host, side-mounting space and use of the two NO contacts in the drawing.
Document the existing A9C15916 circuit, accessories and setpoints before removing hardware. Use the site's isolation and commissioning procedures, and preserve the approved engineering record.
On-site replacement notes
Trace the indication and interlock conductors before removal. Verify contact state with the host released and energized, and do not treat the auxiliary contacts as motor-power poles.
The final choice of A9C15916 depends on the actual installation. Check ambient conditions, available space, mating parts and local electrical requirements rather than inferring fit from appearance.
Application fit
This is an auxiliary for a modular contactor, not a breaker or a contactor by itself. Confirm the exact iCT host, side-mounting space and use of the two NO contacts in the drawing.
After fitting A9C15916, verify the intended function under representative operating conditions and record the result. A matching code does not eliminate the need for a functional check.
Similar-looking reference codes
The following 12 references resemble A9C15916 in their designation. They are grouped here for inquiry and comparison, not claimed to be electrically interchangeable with A9C15916. Check each complete suffix, rating and connection before ordering.
A9C30811, A9C20531, A9C20731, A9C20863, A9C20867, A9C22712, A9C22814, A9C30831, A9CT30225, A9C20732, A9C20838, A9C20844
Quote and acceptance
When requesting A9C15916, include the exact A9C15916 label, site voltage, connected equipment, installation photo and required quantity. State whether original A9C15916 stock or a documented engineering alternative is acceptable. Ask the supplier to confirm current availability, accessories and manufacturer documentation.
Before releasing A9C15916 to site, compare the delivered full code and terminal/connector arrangement with the approved bill of materials. Keep A9C15916 associated with its original application and obtain qualified review if any rating, function or lifecycle status differs.
