9001KP35LRR9 technical identity and replacement considerations for Harmony 9001K red pilot light
9001KP35LRR9 is the complete ordering reference for a Schneider Electric Harmony 9001K red pilot light. This page identifies the confirmed characteristics of 9001KP35LRR9 and the practical fit checks for an existing installation. The shared category collage is a reference image, not an exact photograph of 9001KP35LRR9.
Technical parameters and confirmed identity
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 9001KP35LRR9 |
| Product type | Harmony 9001K red pilot light |
| Operator size | 30 mm |
| Lens | Red domed polycarbonate |
| Lamp | Red LED, 24–28 V |
What the code identifies
The 9001KP35LRR9 designation identifies the part above, not every accessory in the complete system. Purchase and maintenance records should retain the exact 9001KP35LRR9 characters, including any suffix. Where a similar-looking reference exists, compare its full specification rather than treating it as an automatic replacement.
For 9001KP35LRR9, the parameter table separates product identity from site-specific engineering decisions. Ratings in a family brochure may cover several variants; the installed 9001KP35LRR9 nameplate and current manufacturer data remain the final order check.
Application fit and engineering boundaries
Match the panel opening, lamp supply and indicator legend before installation.
Before accepting 9001KP35LRR9, compare the existing panel or machine drawing with the relevant voltage, current, contact, network, pressure or mechanical interface noted for this product. Record cable entry, mounting space, connected load and environmental conditions where applicable.
A procurement request for 9001KP35LRR9 should state the equipment tag and purpose, not just the part number. If the original unit has options or accessories, list them separately; a replacement 9001KP35LRR9 may not include those items.
Installation and functional record
Qualified personnel should isolate the equipment under the site's procedure before fitting 9001KP35LRR9. Photograph the original connections, label conductors, and retain any software or parameter backup relevant to 9001KP35LRR9.
After installation of 9001KP35LRR9, test the operating sequence in a safe state. Record measured supply or signal values, status indications, alarms and the final 9001KP35LRR9 reference on the handover sheet.
If 9001KP35LRR9 is a safety, protection or switching component, complete the application-specific coordination and validation process. The information here is not a substitute for the machine risk assessment or electrical design review.
Similar-looking codes covered by this page
No unassigned close code is included for 9001KP35LRR9 in this batch. If a proposed replacement resembles 9001KP35LRR9, obtain its own current technical data before approval.
Order release checklist
For 9001KP35LRR9, confirm the full designation, the actual installed interface, the rating or setting in the table, and the availability of any required mating part. Mark any deviation from the original 9001KP35LRR9 installation for engineering review.
The final 9001KP35LRR9 selection should be checked against current Schneider Electric product documentation and the delivered device label. Preserve the commissioning record with the order so future 9001KP35LRR9 service decisions remain traceable.
