Identifying 8800310030 for maintenance and replacement enquiries
8800310030 identifies a SpaceLogic Forta M800 globe-valve actuator. This page is a reference for identifying and quoting 8800310030; the common main image is a Schneider category collage, not a guaranteed picture of the exact unit. Read the complete designation on the installed component before selecting a replacement.
Identification passport
| Technical item | Verified value / selection note |
|---|---|
| Full designation | 8800310030 |
| Documented role | SpaceLogic Forta M800 globe-valve actuator |
| Actuator | M800 |
| Nominal force | 800 N |
| Supply | 24 V class |
| Control | Check configured floating or modulating input |
Capture the entire reference and revision.
Check duty, mounting and connections.
Record the test and approved configuration.
Configuration boundary
The record above gives only the facts that can be supported for 8800310030. It does not decode every suffix or establish every rating of 8800310030. Ask for the original datasheet or configuration printout when the installed assembly includes options, firmware, a trip unit, a cable, a sensor or an interface card.
For 8800310030, compare the equipment tag and system drawings with the visible markings. Confirm supply, poles, contacts, protocol, measured range, nominal force or network role as applicable. Do not copy a value from a similar-looking code. If a number is missing, leave it open until the manufacturer record or actual nameplate resolves it.
Procurement and receiving notes
Request an offer for the exact 8800310030 designation and required quantity. The offer should identify stock condition, manufacturer, document revision, included accessories and any exclusions. If the supplier proposes an alternative to 8800310030, ask for a separate written comparison rather than silently accepting a different product family.
At receipt, inspect the 8800310030 label, packaging and supplied accessories. Keep the serial or batch number when present. For a protection, safety or control component, preserve the old settings and approved wiring design before the existing 8800310030 is removed.
Site acceptance
Install 8800310030 only under the applicable isolation and safety procedure. Commissioning must test the specific installed function: switching or protection behavior, relay I/O, sensor response, communication, valve travel or cabling continuity as relevant. A visual match does not prove that 8800310030 has the correct settings or compatibility.
Record the test result and exact 8800310030 code in the maintenance file. If the part is obsolete or service status differs by region, verify stock and approved migration path with the manufacturer. Keep a separate note for substitutions because the replacement may require engineering changes.
Related-looking references
These 2 designations resemble the 880 portion of 8800310030. They are gathered here for finding an enquiry only; a related-looking reference can have a different function, rating or interface and is not automatically interchangeable with 8800310030.
Release statement
Use 8800310030 as the search and purchase reference only when the verified identity and the site's requirements align. Review each unconfirmed configuration item before issuing an order. This 8800310030 record is an identification aid, not a substitute for the manufacturer manual or a site-specific engineering approval.
Other visually similar numeric references
These references have the visible 88 prefix and are included for search and enquiry. They are not claimed to share this product function, ratings or dimensions and are not interchangeable. Confirm the exact full designation and manufacturer documentation for each number.
