Schneider 8502WGO3V06: what to verify for the Square D 8502V vacuum contactor reference
8502WGO3V06 identifies this Square D 8502V vacuum contactor reference enquiry. A shared category collage is used as a reference image, not as an exact photograph of the supplied 8502WGO3V06 item. Before choosing or replacing 8502WGO3V06, read the complete physical label and compare it with the system drawings and the relevant manufacturer material.
Technical data confirmed at this stage
| Technical item | Verified value / selection note |
|---|---|
| Complete enquiry wording | 8502WGO3V06 |
| Documented family or role | Square D 8502V vacuum contactor reference |
| Device class | Vacuum contactor |
| Exact coil and current | Confirm the complete 8502WGO3V06 label and original datasheet |
| Unverified option details | Confirm complete order record and received unit |
A family name or shared code prefix does not establish identical ratings, fit or interchangeability.
The table records the evidence available for 8502WGO3V06. An absent value is deliberately left open. For 8502WGO3V06, the complete configuration may determine the coil, firmware, process interface, mounting arrangement or protection rating; use the installed 8502WGO3V06 label and full datasheet before approving a purchase.
What to send with a purchase enquiry
- Full nameplate photograph and exact designation
- Equipment drawing, location and installed revision
- Required accessories, connectors, cables and condition
- Acceptance test and delivery requirements
Put 8502WGO3V06 on a separate quotation line and ask the seller to restate the full code. If a different version is proposed for 8502WGO3V06, request a written matrix comparing ratings, electrical connections, mechanical fit and software or firmware requirements. The buyer should not accept the substitution merely because it belongs to the same family.
Equipment interface review
Review the immediate neighbours of 8502WGO3V06 in the installation. For a breaker or contactor, check pole arrangement, control supply and auxiliary contacts. For a controller or I/O accessory, check rack, baseplate, network and terminal assignment. For a motor or sensor, check feedback, power, cable and mounting. Apply only the categories relevant to the actual 8502WGO3V06 item.
Compare 8502WGO3V06 against the archived wiring and service record. Record any changes in version, communications, calibration or safety approval. A replacement order for 8502WGO3V06 should identify who will verify those changes and what evidence is required at receiving and commissioning.
Receiving and acceptance
On receipt, inspect the packaging and the actual 8502WGO3V06 marking before installation. Keep serial and revision information in the equipment file. Use the site's electrical and process isolation procedure, then test the specific switching, protection, control, measurement or motion function appropriate to 8502WGO3V06. Record the result rather than relying on a visual match alone.
If 8502WGO3V06 is a legacy item, separately check lifecycle status, condition, warranty and availability of support. If 8502WGO3V06 is offered as refurbished stock, require inspection and test records. If a newer item is offered instead, keep its new designation distinct from 8502WGO3V06 in the approval chain.
Related-looking designations
No further unassigned 8502-pattern code is indexed with 8502WGO3V06; any alternative still needs manufacturer and site verification.
Release check
Release 8502WGO3V06 only after the complete identification, applicable technical requirements, offer and receiving plan agree. Keep 8502WGO3V06 visible in the final procurement record and document every approved deviation.
