56P432-GY mating plug for a 32 A four-pin industrial socket
A request for 56P432-GY should identify the installed equipment and the intended duty. The facts below distinguish 56P432-GY from similar-looking references. The picture is shared across this product category and does not depict a guaranteed 56P432-GY configuration.
Verified product data
| Technical item | Verified value / selection note |
|---|---|
| Complete reference | 56P432-GY |
| Product family | Clipsal 56 Series industrial plug |
| Pins | 4 round pins |
| Rating | 32 A, 500 V AC class |
| Ingress protection | IP66 when correctly assembled |
| Colour | Grey |
Fit assessment
Compare the pin pattern and keying with the installed outlet, including earthing and supply system. This is the plug, whereas 56CV432-GY in the previous batch is a switched socket-outlet.
For 56P432-GY, verify the actual supply, mating equipment and duty cycle. A family name is useful for search, but the complete 56P432-GY suffix and installed configuration control the purchase decision.
Commissioning points
- Record the old 56P432-GY label, wiring and settings. Inspect the cable size, gland and conductor termination before assembly. Verify strain relief and seal integrity after wiring, then test under site electrical procedures.
- Compare the offered 56P432-GY with the manufacturer's current technical description, accessories and lifecycle information. Test the installed function under the site's approved procedure.
Procurement review
What should the order include?
Quote the exact 56P432-GY designation, quantity, panel or machine identifier, supply and interface details. Attach a clear photo of the original label and the mating equipment.
Can a nearby model replace it?
Treat another code as a proposed alternative to 56P432-GY, not an automatic substitute. Compare electrical ratings, terminals, mechanical dimensions, certification and programming before approval.
How is the installation accepted?
For 56P432-GY, retain the as-found configuration, confirm the delivered reference and document a functional test. Where protection or safety is involved, use the applicable qualified validation process.
Other look-alike order codes
No unassigned, sufficiently similar code was available to group with 56P432-GY in this selection. Do not infer equivalence from a common visual form.
Final order check
Confirm the printed 56P432-GY code, current Schneider Electric or Clipsal documentation, the site's supply and environmental conditions, and the required accessories before committing to 56P432-GY. Keep this technical review with the purchase record for 56P432-GY.
