3009 — Schneider Triconex 3009 main-processor model: procurement passport
3009 identifies a Triconex 3009 main-processor model. This page is a reference for identifying and quoting 3009; the common main image is a Schneider category collage, not a guaranteed picture of the exact unit. Read the complete designation on the installed component before selecting a replacement.
Identification passport
| Technical item | Verified value / selection note |
|---|---|
| Full designation | 3009 |
| Documented role | Triconex 3009 main-processor model |
| System | Triconex safety system |
| Model identification | 3009 MP in Schneider security notice |
| Firmware and chassis | Confirm on installed system |
Capture the entire reference and revision.
Check duty, mounting and connections.
Record the test and approved configuration.
Configuration boundary
The record above gives only the facts that can be supported for 3009. It does not decode every suffix or establish every rating of 3009. Ask for the original datasheet or configuration printout when the installed assembly includes options, firmware, a trip unit, a cable, a sensor or an interface card.
For 3009, compare the equipment tag and system drawings with the visible markings. Confirm supply, poles, contacts, protocol, measured range, nominal force or network role as applicable. Do not copy a value from a similar-looking code. If a number is missing, leave it open until the manufacturer record or actual nameplate resolves it.
Procurement and receiving notes
Request an offer for the exact 3009 designation and required quantity. The offer should identify stock condition, manufacturer, document revision, included accessories and any exclusions. If the supplier proposes an alternative to 3009, ask for a separate written comparison rather than silently accepting a different product family.
At receipt, inspect the 3009 label, packaging and supplied accessories. Keep the serial or batch number when present. For a protection, safety or control component, preserve the old settings and approved wiring design before the existing 3009 is removed.
Site acceptance
Install 3009 only under the applicable isolation and safety procedure. Commissioning must test the specific installed function: switching or protection behavior, relay I/O, sensor response, communication, valve travel or cabling continuity as relevant. A visual match does not prove that 3009 has the correct settings or compatibility.
Record the test result and exact 3009 code in the maintenance file. If the part is obsolete or service status differs by region, verify stock and approved migration path with the manufacturer. Keep a separate note for substitutions because the replacement may require engineering changes.
Related-looking references
These 8 designations resemble the 30 portion of 3009. They are gathered here for finding an enquiry only; a related-looking reference can have a different function, rating or interface and is not automatically interchangeable with 3009.
Release statement
Use 3009 as the search and purchase reference only when the verified identity and the site's requirements align. Review each unconfirmed configuration item before issuing an order. This 3009 record is an identification aid, not a substitute for the manufacturer manual or a site-specific engineering approval.
Additional similar-looking designations
Triconex written designations are indexed here for search and enquiry. They may designate different hardware, functions or configurations and are not automatically interchangeable. Check each exact reference, rating and manufacturer record.
