140CPS11410 technical identity and replacement considerations for Modicon Quantum AC power supply module
140CPS11410 is the complete ordering reference for a Schneider Electric Modicon Quantum AC power supply module. This page identifies the confirmed characteristics of 140CPS11410 and the practical fit checks for an existing installation. The shared category collage is a reference image, not an exact photograph of 140CPS11410.
Technical parameters and confirmed identity
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 140CPS11410 |
| Product type | Modicon Quantum AC power supply module |
| Input | 115/230 V AC |
| Module | Summable rack supply |
| Status | Legacy reference; check current support |
What the code identifies
The 140CPS11410 designation identifies the part above, not every accessory in the complete system. Purchase and maintenance records should retain the exact 140CPS11410 characters, including any suffix. Where a similar-looking reference exists, compare its full specification rather than treating it as an automatic replacement.
For 140CPS11410, the parameter table separates product identity from site-specific engineering decisions. Ratings in a family brochure may cover several variants; the installed 140CPS11410 nameplate and current manufacturer data remain the final order check.
Application fit and engineering boundaries
Audit the rack power budget and migration plan; do not assume a new X80 supply is a drop-in Quantum replacement.
Before accepting 140CPS11410, compare the existing panel or machine drawing with the relevant voltage, current, contact, network, pressure or mechanical interface noted for this product. Record cable entry, mounting space, connected load and environmental conditions where applicable.
A procurement request for 140CPS11410 should state the equipment tag and purpose, not just the part number. If the original unit has options or accessories, list them separately; a replacement 140CPS11410 may not include those items.
Installation and functional record
Qualified personnel should isolate the equipment under the site's procedure before fitting 140CPS11410. Photograph the original connections, label conductors, and retain any software or parameter backup relevant to 140CPS11410.
After installation of 140CPS11410, test the operating sequence in a safe state. Record measured supply or signal values, status indications, alarms and the final 140CPS11410 reference on the handover sheet.
If 140CPS11410 is a safety, protection or switching component, complete the application-specific coordination and validation process. The information here is not a substitute for the machine risk assessment or electrical design review.
Similar-looking codes covered by this page
The following codes resemble 140CPS11410 and are grouped here as reference variants, so they are not scheduled as separate product pages. Similar spelling does not mean electrical or mechanical interchangeability. Compare each full code, option and rating to 140CPS11410.
140CPS12420C
Order release checklist
For 140CPS11410, confirm the full designation, the actual installed interface, the rating or setting in the table, and the availability of any required mating part. Mark any deviation from the original 140CPS11410 installation for engineering review.
The final 140CPS11410 selection should be checked against current Schneider Electric product documentation and the delivered device label. Preserve the commissioning record with the order so future 140CPS11410 service decisions remain traceable.
