PDP22-FBP.500 setup: PROFIBUS connection, cable length and device checks
PDP22-FBP.500 is an ABB PROFIBUS DP FieldBusPlug configuration with a 0.5 m cable designation. The order code associated with this variant is 1SAJ240100R1050. PDP22-FBP.500 provides the communication link; it does not define the operating limits or protection settings of the connected motor controller.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Type | PDP22-FBP.500 |
| ABB order code | 1SAJ240100R1050 |
| Interface | PROFIBUS DP-V0/V1 FieldBusPlug |
| Cable version | 0.5 m designation; verify connector-to-device arrangement |
| Power and endpoint | Confirm compatible FBP device and 24 V DC requirements from the exact manual |
| Commissioning | Address, bus rate, GSD/device description, segment termination |
Identification note: PDP22-FBP.500. The figures above are selection references; verify the actual label, duty rating, approvals, firmware and options for the exact unit before purchase or engineering release.
System role and signal path
Signal path: PDP22-FBP.500 is one element in a wider control or measurement loop. Check what the field device measures or switches, how the controller receives that state, and what diagnostic behavior the operator should see.
Interface and control path
Confirm that the target FBP product supports PDP22-FBP.500, then check the PROFIBUS address, baud rate, GSD file, PLC hardware configuration and termination at the physical segment ends. Validate the exact connector, cable and electrical requirements from the relevant revision; related PDP22 cable lengths are not automatically interchangeable for every panel arrangement.
Related configurations
The following model references belong to the same identifiable family as PDP22-FBP.500; they are configuration alternatives, not automatic substitutes. Compare each complete designation and application before selecting.
- 1SAJ240100R1003, PDP22-FBP.025
- 1SAJ240100R1005, PDP22-FBP.050
- 1SAJ240100R1010, PDP22-FBP.100
- 1SAJ240100R1050, PDP22-FBP.500
- PDP22-FBP.100 (1SAJ240100R1010)
For the PDP22-FBP.500 record, retain the full type string and do not infer range, rating or compatibility from a shortened family code.
Field validation
Make wiring changes with the bus isolated. Connect PDP22-FBP.500 using the documented orientation and strain relief, preserve shield continuity and set segment termination only at the correct endpoints. Commission by checking device recognition, diagnostics and cyclic I/O mapping, then test an application command and its returned status at the supervisory controller.
Before replacement, compare PDP22-FBP.500 with the installed revision, accessories, wiring and engineering configuration.
