ABB 3AXD50001179212 replacement profile
ABB 3AXD50001179212 identifies a drive DC-capacitor service kit for a specific service position. The goal is to replace the specified R10 DC-link capacitor set. The shared category image is illustrative, so verify the received ABB 3AXD50001179212 against the actual marking and host manual.
Verified part identity and technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AXD50001179212 |
| Product family | R10 400/500 V DC-capacitor kit 8X |
| Component role | drive DC-capacitor service kit |
| Exact ABB order reference | 3AXD50001179212 |
| ABB product series | R10 400/500 V DC-capacitor kit 8X |
| ABB order code | 3AXD50001179212 |
| Manufacturer designation | R10 400V_500V CAPACITOR KIT 8X |
| ABB description | R10 400V_500V CAPACITOR KIT 8X; DC CAPACITOR KIT |
| ABB designation | R10 400V_500V CAPACITOR KIT 8X |
| Host | R10 frame |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 3AXD50001179212 values above come from the named manufacturer description. Where a rating, interface or compatible host is not stated, it must be checked on the installed equipment rather than assumed from a nearby model.
Purchase decision
- Quote the complete ABB 3AXD50001179212 code in the request.
- For ABB 3AXD50001179212, confirm R10 host, 400/500 V version and eight-piece kit.
- Hold ABB 3AXD50001179212 for clarification if marking, supplied parts or host differ.
What the part changes
ABB 3AXD50001179212 is selected for the documented circuit or maintenance role. Identify the assembly position, system version and expected function before procurement.
A family name alone does not establish that ABB 3AXD50001179212 can replace a neighboring control board, fan, capacitor or power module.
Work authorization and isolation
Qualified personnel must isolate ABB 3AXD50001179212 and the surrounding equipment in accordance with the applicable ABB and site safety instructions. Verify stored energy, DC-link discharge and earthing where relevant.
This ABB 3AXD50001179212 page does not define a universal safe waiting time or substitute for the equipment-specific maintenance manual.
Evidence from the installed unit
Record the ABB 3AXD50001179212 host label, as-found part marking, connections and any relevant software or parameter backup. Keep the drawing revision beside this evidence.
If ABB 3AXD50001179212 is a replacement, compare old and new connector keying, rating text and supplied kit contents before removing the old part.
Fitting the correct version
Check R10 host, 400/500 V version and eight-piece kit for ABB 3AXD50001179212. Confirm orientation, mounting, protective barriers, cable routing and cooling path before energization.
Where ABB 3AXD50001179212 has a programmed or frame-specific variant, match that version explicitly rather than using a visual fit as approval.
Receiving and stock control
At receipt, compare ABB 3AXD50001179212, package quantity and physical condition with the purchase order. Segregate mismatched or damaged parts.
Keep ABB 3AXD50001179212 indexed by the complete code, confirmed host and service position so that later purchases do not rely on a shortened family label.
Commissioning proof
After ABB 3AXD50001179212 is installed, verify discharge, connections and charging. Observe relevant alarms, feedback and inhibited states under an approved test plan.
Save the ABB 3AXD50001179212 test conditions and outcome with the equipment record; a successful power-up alone is not full acceptance.
Future replacement note
When ABB 3AXD50001179212 is used again, recheck the current host documentation and any revised part or firmware before approving substitution.
Retain the ABB 3AXD50001179212 acceptance result, installed serial information and revision-specific restrictions for maintenance planning.
Service handover
Keep the ABB 3AXD50001179212 selection and test records with the maintenance job.
Use ABB 3AXD50001179212 as the full order-code keyword in future enquiries.
