Identifying ABB 3AUA0000082226 for the installed system
ABB 3AUA0000082226 identifies a drive film-capacitor spare for a specific service position. The goal is to restore the documented film-capacitor position. The shared category image is illustrative, so verify the received ABB 3AUA0000082226 against the actual marking and host manual.
Verified part identity and technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AUA0000082226 |
| Product family | MKP and 107 µF / 1000 V AC film-capacitor options |
| Component role | drive film-capacitor spare |
| Exact ABB order reference | 3AUA0000082226 |
| ABB product series | MKP and 107 µF / 1000 V AC film-capacitor options |
| ABB order code | 3AUA0000082226 |
| Manufacturer designation | MKP CAPACITOR |
| ABB description | MKP CAPACITOR; CAPACITOR |
| Representative | MKP capacitor |
| Related rating text | 107 µF / 1000 V AC belongs to the separate ABB order code |
| Variant reference | 3AUA0000090743: 107UF / 1000VAC; FILM CAPACITOR |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 3AUA0000082226 values above come from the named manufacturer description. Where a rating, interface or compatible host is not stated, it must be checked on the installed equipment rather than assumed from a nearby model.
Purchase decision
- Quote the complete ABB 3AUA0000082226 code in the request.
- For ABB 3AUA0000082226, confirm capacitance, voltage, AC application and physical fit for each code.
- Hold ABB 3AUA0000082226 for clarification if marking, supplied parts or host differ.
What the part changes
ABB 3AUA0000082226 is selected for the documented circuit or maintenance role. Identify the assembly position, system version and expected function before procurement.
A family name alone does not establish that ABB 3AUA0000082226 can replace a neighboring control board, fan, capacitor or power module.
Evidence from the installed unit
Record the ABB 3AUA0000082226 host label, as-found part marking, connections and any relevant software or parameter backup. Keep the drawing revision beside this evidence.
If ABB 3AUA0000082226 is a replacement, compare old and new connector keying, rating text and supplied kit contents before removing the old part.
Work authorization and isolation
Qualified personnel must isolate ABB 3AUA0000082226 and the surrounding equipment in accordance with the applicable ABB and site safety instructions. Verify stored energy, DC-link discharge and earthing where relevant.
This ABB 3AUA0000082226 page does not define a universal safe waiting time or substitute for the equipment-specific maintenance manual.
Fitting the correct version
Check capacitance, voltage, AC application and physical fit for each code for ABB 3AUA0000082226. Confirm orientation, mounting, protective barriers, cable routing and cooling path before energization.
Where ABB 3AUA0000082226 has a programmed or frame-specific variant, match that version explicitly rather than using a visual fit as approval.
Commissioning proof
After ABB 3AUA0000082226 is installed, check insulation, terminations and thermal condition. Observe relevant alarms, feedback and inhibited states under an approved test plan.
Save the ABB 3AUA0000082226 test conditions and outcome with the equipment record; a successful power-up alone is not full acceptance.
Receiving and stock control
At receipt, compare ABB 3AUA0000082226, package quantity and physical condition with the purchase order. Segregate mismatched or damaged parts.
Keep ABB 3AUA0000082226 indexed by the complete code, confirmed host and service position so that later purchases do not rely on a shortened family label.
Future replacement note
When ABB 3AUA0000082226 is used again, recheck the current host documentation and any revised part or firmware before approving substitution.
Retain the ABB 3AUA0000082226 acceptance result, installed serial information and revision-specific restrictions for maintenance planning.
ABB variants represented on this page
The following codes share the ABB 3AUA0000082226 service family and are not being given separate product pages. Their rating, frame, supplied parts or programmed state may differ; do not assume interchangeability with ABB 3AUA0000082226.
- 3AUA0000090743
Service handover
Keep the ABB 3AUA0000082226 selection and test records with the maintenance job.
Use ABB 3AUA0000082226 as the full order-code keyword in future enquiries.
