Configuration review: Yokogawa SC24V-ALN26-120
Yokogawa SC24V-ALN26-120 is a conductivity sensor/accessory. This page puts the product identity and system checks first so the complete configuration can be compared with the installation. Use the exact code SC24V-ALN26-120 in the enquiry and verify it against current manufacturer documentation.
| Selection point | Specification / confirmation |
|---|---|
| Representative model | SC24V-ALN26-120 |
| Product | Conductivity sensor/accessory |
| Selection | Cell, liquid, fitting and analyzer |
| Configuration | Confirm temperature and cable details |
| Verification | Sample conditions and sensor setup |
Selection context
SC24V-ALN26-120 is listed as a Yokogawa conductivity sensor or accessory. Determine its exact role, cell configuration and compatible analyzer from the nameplate and product specification. For Yokogawa SC24V-ALN26-120, establish the sample range, liquid chemistry and mounting arrangement before specifying the sensor assembly. Keep the full Yokogawa SC24V-ALN26-120 designation attached to the equipment tag, system drawing and purchase documentation. This helps distinguish SC24V-ALN26-120 from a similarly named module or a package that includes additional hardware.
Installation review
Before accepting SC24V-ALN26-120, inspect the sensor, configure the analyzer and verify the measurement with the suitable procedure and standards. Record cell details, temperature and sample conditions. A replacement enquiry should preserve the full Yokogawa SC24V-ALN26-120 code and the associated analyzer identity. Keep the full Yokogawa SC24V-ALN26-120 designation attached to the equipment tag, system drawing and purchase documentation. This helps distinguish SC24V-ALN26-120 from a similarly named module or a package that includes additional hardware.
Pre-order review
- Expected conductivity range and sample chemistry
- Cell, fitting and wetted materials
- Analyzer, cable and temperature input
- Verification standard and records
As-left evidence
Verify SC24V-ALN26-120 process connection, materials, cable and temperature element, and confirm the converter accepts the sensor configuration. The correct cell and installation are necessary for meaningful conductivity results. Clarify whether the supply is sensor-only or includes fittings and cabling for Yokogawa SC24V-ALN26-120. Keep the full Yokogawa SC24V-ALN26-120 designation attached to the equipment tag, system drawing and purchase documentation. This helps distinguish SC24V-ALN26-120 from a similarly named module or a package that includes additional hardware.
Before the order is released
For Yokogawa SC24V-ALN26-120, provide the quantity, delivery requirement, complete order code, equipment tag and reason for purchase. Identify the associated station, sensor, converter, cable, terminal board or other connected equipment, as applicable. State which accessories and technical documents must be included. Compare the offered SC24V-ALN26-120 configuration with the approved requirement before releasing the order, and clarify any proposed substitute or deviation in writing.
Final checks at receipt
At receiving inspection, verify Yokogawa SC24V-ALN26-120 against the order and nameplate, then check package contents and requested documentation. Before installation, confirm that the code matches the system drawing and the intended location. If a mismatch is found, pause the change and have it reviewed by the responsible engineer. Retain the supplied model, system revision, configuration, test evidence and restoration notes together so future support for SC24V-ALN26-120 can be based on the equipment actually installed.
