Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX: FC 102 drive selection for ventilation motor service
Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX identifies a VLT HVAC Drive FC 102. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX |
| Manufacturer / item class | Danfoss VLT HVAC Drive FC 102 |
| Drive family | VLT HVAC Drive FC 102 |
| P11K code | 11 kW class; check motor nameplate |
| T4 code | 3-phase 380–480 V AC family |
| E20 code | IP20 class; verify complete frame |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
HVAC operation
For Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX, assess fan or pump control mode, motor current and expected operating range.
Electrical interface
For Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX, compare mains protection, speed reference and building-control signals to the approved drawing.
Commissioning
For Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX, restore approved parameters, then test run/stop, direction and alarms.
Similar-looking Danfoss order references
These order strings resemble Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss FC-102P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX identity.
