low voltage

Hotline

Danfoss 157B4033 | PVEH32 Passive Actuator, DIN Connector and Supply Review

description:Danfoss 157B4033 PVEH32 hydraulic valve actuator: verified technical data, selection checks and similar-looking order references....
BASIC INFO

Danfoss 157B4033: electrohydraulic actuator identification

Danfoss 157B4033 identifies a PVEH32 hydraulic valve actuator. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 157B4033 item.

Key technical data

Technical itemVerified value / selection note
Complete order number157B4033
Manufacturer / item classDanfoss PVEH32 hydraulic valve actuator
ProductPVEH32 actuator, passive version
Supply on manufacturer item page11–32 V DC
Connector1 × 4 DIN 43650-A / ISO 4400
Manufacturer statusObsolete; replacement reference 11166824
Image scopeShared Danfoss category collage, not exact-item photograph
Final selection ruleVerify complete printed code, interface and application before substitution

Hydraulic interface

For Danfoss 157B4033, compare PVG valve section, actuator fit and pilot-pressure arrangement.

Electrical fit

For Danfoss 157B4033, check connector pinout and ratiometric control against the installed harness.

Substitution

For Danfoss 157B4033, treat 11166824 as a manufacturer recommendation, not a site-approved replacement until checked.

Similar-looking Danfoss order references

These order strings resemble Danfoss 157B4033 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 157B4033; verify each complete code independently.

157B4116
157B4128
157B4228
157B4833
157B6600

Ordering and receiving review

Request a quotation against the full Danfoss 157B4033 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.

When Danfoss 157B4033 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 157B4033 identity.

 

 

Pre:Danfoss 027H7167 ICLX 150 | DN150 Two-Step Solenoid Valve, Butt-Weld Fit and Pilot Check Next:Danfoss 181B0314 | VACON RS485 Modbus/N2 Option Board and Integration Check