low voltage

Hotline

Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX VLT AQUA Drive FC 202 | Buyer Guide to the Complete Designation and Site Interfaces

description:Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX VLT AQUA Drive FC 202: technical selection, installed-unit checks and ordering notes....
BASIC INFO

Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX: identify the exact VLT AQUA Drive FC 202 before ordering

Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX is retained here as a complete enquiry designation for the VLT AQUA Drive FC 202 family. The FC 202 family is intended for water and wastewater pump applications. Pump control functions and available hardware depend on the ordered version and commissioned parameter set. The image illustrates the Danfoss product category, not the exact Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX device.

Key technical data

Technical itemVerified value / selection note
Complete model / keyword136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX
Manufacturer familyDanfoss VLT AQUA Drive FC 202
Order-number field136F3687
Printed type-code fieldFC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX
Rating code in designationP11K; verify actual kW, output current and overload duty on the unit record
Supply identifierT4; confirm phase, voltage and frequency on the exact nameplate
Enclosure and optionsConfirm fitted enclosure, filter, keypad, fieldbus and I/O against the complete configuration
Motor and load matchCompare motor nameplate current, load type, duty cycle and site conditions
Product imageShared Danfoss category collage; not a photograph of this exact order code

Decode the complete designation

The sales-number field and the type-code field together identify Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX. Do not quote only the short family name. Compare every character with the existing nameplate and original Danfoss order record; a changed suffix can alter the enclosure, control options or approval status.

Electrical rating and motor fit

Before replacing Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX, record input phase and voltage, motor kW, full-load current, overload duty and protective-device arrangement. A family-level voltage range is not proof of this unit’s exact supply. Check the actual output-current rating and any derating for ambient temperature, altitude or switching frequency.

Panel and field interfaces

For Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX, compare cabinet clearance, heat removal, cable-entry position, protective earth and motor-cable routing. Confirm the operator panel, I/O terminals, communication option and any external filter from the full equipment record. Similar-looking drive strings can need different physical interfaces.

Water-system control and feedback

For Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX, identify the pump curve, pressure or flow transmitter, dry-run protection and minimum-speed limit. Compare feedback scaling and the control mode with the approved water-system sequence before reusing settings from another FC 202.

Commissioning and acceptance

After fitting Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX, enter the actual motor-nameplate values and follow the manufacturer and site commissioning procedure. Test rotation, operating speed, load current, alarm response and safe stop conditions as applicable. Record the final settings and the complete Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX designation for future service.

Ordering and receiving decision

Ask the supplier to confirm Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX as a complete code, including its fitted options and manufacturer status. Treat any alternative number as a separate proposal requiring a documented technical comparison. The family information above supports preliminary screening only; the exact Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX record controls the final purchase.

When Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX arrives, match the printed designation, accessory list and physical connectors against the agreed quotation. Keep the receiving and commissioning evidence with the maintenance file so future requests preserve the exact Danfoss 136F3687 FC-202P11KT4P55H2TGX1XXSXXXXAXBXCXXXXDX identity.

 

 

Pre:Danfoss 135X4361 FC-202N355T4E21H2XGC7XXSXXXXAXBXCXXXXDX VLT AQUA Drive FC 202 for pump and water-system drive control | Type Identity and Replacement Planning Next:Danfoss 136Z3262 FC-102N450T4E20H2XGCXXXSXXXXAXBXCXXXXD0 VLT HVAC Drive FC 102 | Supply, Enclosure and Commissioning Review