Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0: FC 302 order identity for high-power motor duty
Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0 identifies a VLT AutomationDrive FC 302. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0 |
| Manufacturer / item class | Danfoss VLT AutomationDrive FC 302 |
| Series | VLT AutomationDrive FC 302 |
| Power code | N250; confirm precise kW and overload rating from label |
| T5 code | 3-phase 380–500 V AC family |
| E5M code | Verify enclosure construction in current Danfoss configuration |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Power-system review
For Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0, check supply capacity, motor current and thermal load before replacement.
Mechanical planning
For Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0, confirm cabinet dimensions, cable entry and safe lifting provisions.
Commissioning
For Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0, apply approved parameters and record load current and protective behavior.
Similar-looking Danfoss order references
These order strings resemble Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 132H2040 FC-302N250T5E5MH2XGC7XXSXXXXALBKCXXXXD0 identity.
