Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX: supply and panel fit
Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX identifies a VLT HVAC Drive FC 102 frequency converter. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX |
| Manufacturer / item class | Danfoss VLT HVAC Drive FC 102 frequency converter |
| Manufacturer series | VLT HVAC Drive FC 102 |
| Type-code power | P4K0 denotes 4.0 kW |
| Type-code supply | T4 denotes three-phase 380–480 V class |
| Type-code enclosure | E20 denotes IP20 / chassis in manufacturer product detail |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Full code review
For Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX, keep both the 131B ordering number and complete FC-102 type code when requesting a quote; a shared prefix does not identify options.
Motor and panel fit
For Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX, compare mains phase, motor nameplate, enclosure, cooling clearance and control wiring before replacing the drive.
Commissioning record
For Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX, save the approved parameter set and test speed reference, direction, motor current and fault behavior on the connected HVAC equipment.
Similar-looking Danfoss order references
These order strings resemble Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 131B4215 FC-102P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX identity.
