Danfoss 11166824: hydraulic valve actuation replacement
Danfoss 11166824 identifies a PVEH32 electrohydraulic actuator. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 11166824 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 11166824 |
| Manufacturer / item class | Danfoss PVEH32 electrohydraulic actuator |
| Danfoss code | 11166824 |
| Manufacturer type | PVEH32 passive actuator |
| Electrical supply | 11–32 V DC |
| Connector | 1 × 4 DIN 43650-A / ISO 4400 |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Valve interface
For Danfoss 11166824, compare the PVG section and PVE32 O-ring interface to the existing actuator.
Control signal
For Danfoss 11166824, verify ratiometric command and harness pinout before energizing.
Proving test
For Danfoss 11166824, check neutral, stroke, response and fault reaction under the machine procedure.
Similar-looking Danfoss order references
These order strings resemble Danfoss 11166824 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 11166824; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 11166824 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 11166824 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 11166824 identity.
