Danfoss 082G3015 AME 20 actuator: control input and valve-mounting fit
Danfoss 082G3015 identifies a AME 20 modulating valve actuator. The verified manufacturer details below apply to this order number; other codes that look similar may be different parts. The common category image is a reference collage, not a photograph of the exact Danfoss 082G3015 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 082G3015 |
| Manufacturer / item class | Danfoss AME 20 modulating valve actuator |
| Supply / designation | AME 20, 24 V |
| Closing force | 450 N |
| Stroke / speed | 10 mm / 15 s per mm |
| Input options | 0(2)–10 V or 0(4)–20 mA control input listed by Danfoss |
| Image scope | Shared Danfoss category collage, not an exact-model photograph |
| Final selection rule | Match complete installed label and manufacturer record before substitution |
Actuator and valve pairing
For Danfoss 082G3015, check the exact valve body, coupling, available stroke and required closing force before ordering. The actuator number does not by itself confirm fit to every motorised valve.
Control-signal planning
For Danfoss 082G3015, identify the installed controller's voltage or current command and feedback arrangement. Match DIP-switch or setup requirements to the approved controls drawing.
Functional checkout
For Danfoss 082G3015, after mounting, test travel direction, full stroke, end positions and the valve's response to a changing command. Record the 24 V supply and final configuration.
Similar-looking Danfoss order references
The following codes resemble Danfoss 082G3015 in the supplied order-number set. They are search and enquiry references only, not interchangeability approvals. Verify every code's own function, ratings, interfaces and availability before ordering.
Quotation and receiving checklist
When requesting Danfoss 082G3015, provide the full printed order number, the installed equipment identity and the operating duty. Compare the supplier's quotation to the exact Danfoss 082G3015 record, including package quantity and any accessory boundary. A visually matching item with another suffix needs a separate engineering decision.
On receipt of Danfoss 082G3015, check the label, connector or mechanical interfaces, packaging and condition. Document the approved settings or test result after installation so the maintenance record continues to identify Danfoss 082G3015 unambiguously.
