Danfoss 078G1006: high-pressure sensing interface
Danfoss 078G1006 identifies a DST P92S pressure transmitter. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 078G1006 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 078G1006 |
| Manufacturer / item class | Danfoss DST P92S pressure transmitter |
| Article number | 078G1006 |
| Manufacturer type | DST P92S |
| Pressure span | 0–600 bar gauge |
| Connections | M12 × 1 electrical; G 1/4 pressure |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Process fit
For Danfoss 078G1006, confirm pressure rating, port seal and medium compatibility.
Signal loop
For Danfoss 078G1006, check the exact current-output and DC supply requirements before wiring.
Measurement proof
For Danfoss 078G1006, compare readings with an approved pressure reference and verify alarms.
Similar-looking Danfoss order references
These order strings resemble Danfoss 078G1006 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 078G1006; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 078G1006 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 078G1006 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 078G1006 identity.
