Danfoss 061F6050 ACB pressure switch for fixed trip-point applications
Danfoss 061F6050 identifies a ACB cartridge pressure switch. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 061F6050 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 061F6050 |
| Manufacturer / item class | Danfoss ACB cartridge pressure switch |
| Higher activation pressure | 384 psi |
| Lower activation pressure | 261 psi |
| Contact / reset | SPST normally closed / automatic reset |
| Connection / enclosure | 1/4 in flare, cable / IP65 |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Fixed pressure action
For Danfoss 061F6050, check both trip and reset pressures against the equipment's approved safety and control settings.
Electrical circuit
For Danfoss 061F6050, confirm the normally closed contact logic and supplied cable arrangement with the existing control panel.
Functional acceptance
For Danfoss 061F6050, test switching through a controlled pressure cycle and document the actual controller response.
Similar-looking Danfoss order references
These order strings resemble Danfoss 061F6050 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 061F6050; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 061F6050 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 061F6050 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 061F6050 identity.
