Danfoss 060-110191 KP1 low-pressure switch: settings and connection checks
Danfoss 060-110191 identifies a KP1 refrigeration low-pressure switch. The verified manufacturer details below apply to this order number; other codes that look similar may be different parts. The common category image is a reference collage, not a photograph of the exact Danfoss 060-110191 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 060-110191 |
| Manufacturer / item class | Danfoss KP1 refrigeration low-pressure switch |
| Regulation range | -0.2 to 7.5 bar Pe |
| Differential range | 0.7 to 4 bar |
| Contact / reset | SPDT / automatic reset |
| Pressure port | 1/4 in male flare; IP44 enclosure |
| Image scope | Shared Danfoss category collage, not an exact-model photograph |
| Final selection rule | Match complete installed label and manufacturer record before substitution |
Setpoint review
For Danfoss 060-110191, record the existing cut-in, cut-out and differential before disturbing the old switch. Confirm that the target operating points lie within the published KP1 adjustment range.
Circuit and port
For Danfoss 060-110191, verify the controller's SPDT wiring, pressure port, flare connection and cable entry. Similar order numbers may differ in reset action, enclosure or connection design.
Commissioning
For Danfoss 060-110191, use a calibrated pressure reference to observe switching at the required settings. Verify alarm and restart behavior in the actual refrigeration circuit before handover.
Similar-looking Danfoss order references
The following codes resemble Danfoss 060-110191 in the supplied order-number set. They are search and enquiry references only, not interchangeability approvals. Verify every code's own function, ratings, interfaces and availability before ordering.
Quotation and receiving checklist
When requesting Danfoss 060-110191, provide the full printed order number, the installed equipment identity and the operating duty. Compare the supplier's quotation to the exact Danfoss 060-110191 record, including package quantity and any accessory boundary. A visually matching item with another suffix needs a separate engineering decision.
On receipt of Danfoss 060-110191, check the label, connector or mechanical interfaces, packaging and condition. Document the approved settings or test result after installation so the maintenance record continues to identify Danfoss 060-110191 unambiguously.
