Danfoss 037N0027(ECI 10-3) solid-state contactor for controlled motor loads
Danfoss 037N0027(ECI 10-3) identifies a ECI 10-3 electronic contactor. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 037N0027(ECI 10-3) item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 037N0027(ECI 10-3) |
| Manufacturer / item class | Danfoss ECI 10-3 electronic contactor |
| Manufacturer type | CI-tronic ECI 10-3 electronic contactor |
| Working current | 10 A class in manufacturer ordering data |
| Control-voltage variant | 24–230 V AC/DC in manufacturer ordering table |
| Module width | 45 mm class; confirm installed variant |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Exact suffix matters
For Danfoss 037N0027(ECI 10-3), the source string includes both the order number and ECI 10-3 type. Keep them together when searching for a replacement.
Panel and electrical fit
For Danfoss 037N0027(ECI 10-3), confirm line voltage, control-voltage circuit, current duty and thermal conditions against the installed panel drawing.
Functional acceptance
For Danfoss 037N0027(ECI 10-3), after fitting, test the command input, three-phase output behavior and protective interlocks under actual load.
Similar-looking Danfoss order references
These order strings resemble Danfoss 037N0027(ECI 10-3) visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 037N0027(ECI 10-3); verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 037N0027(ECI 10-3) code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 037N0027(ECI 10-3) arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 037N0027(ECI 10-3) identity.
