Danfoss 037H004131: legacy contactor service comparison
Danfoss 037H004131 identifies a CI 16 contactor reference. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 037H004131 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 037H004131 |
| Manufacturer / item class | Danfoss CI 16 contactor reference |
| Manufacturer reference | 037H004131 in Danfoss electrical-parts literature |
| Item family | Contactor / coil-controlled switching device |
| Reported coil reference | 230 V AC / 50 Hz; verify installed label |
| Fit rule | Check pole arrangement, auxiliary contacts and motor duty |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Coil first
For Danfoss 037H004131, compare the actual control voltage and frequency before placing an order.
Panel geometry
For Danfoss 037H004131, confirm mounting, terminals and auxiliary-contact configuration.
Safe changeover
For Danfoss 037H004131, isolate the circuit and test pickup, dropout and overload coordination after fitting.
Similar-looking Danfoss order references
These order strings resemble Danfoss 037H004131 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 037H004131; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 037H004131 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 037H004131 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 037H004131 identity.
