Danfoss 017D002166 RT 260A switch for differential-pressure monitoring
Danfoss 017D002166 identifies a RT 260A differential pressure switch. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 017D002166 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 017D002166 |
| Manufacturer / item class | Danfoss RT 260A differential pressure switch |
| Manufacturer type | RT 260A differential pressure switch |
| Regulation range | 0.5–4 bar in manufacturer data |
| Differential | 0.3 bar in manufacturer data |
| Maximum working pressure | 22 bar in manufacturer data |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Setpoint review
For Danfoss 017D002166, record the existing differential-pressure setting and line-pressure conditions before changing the switch.
Process connection
For Danfoss 017D002166, verify high- and low-pressure port routing, joint form and mounting against the installed drawing.
Functional acceptance
For Danfoss 017D002166, apply a controlled differential-pressure test and confirm the electrical contact and plant response.
Similar-looking Danfoss order references
These order strings resemble Danfoss 017D002166 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 017D002166; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 017D002166 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 017D002166 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 017D002166 identity.
