Application and technical record for OLK02-M8 232224
Pepperl+Fuchs OLK02-M8 232224 is a M8 connector protective cap used to protect an unused connector position. This service brief separates the confirmed identity of OLK02-M8 232224 from the installation choices that must be checked on site. The shared Pepperl+Fuchs main image is an illustrative category montage, not an exact photograph of OLK02-M8 232224. Use the complete designation on the fitted label when enquiring or replacing the part.
Technical parameters at a glance
| Technical item | Verified value / selection note |
|---|---|
| Exact model | OLK02-M8 232224 |
| Product role | M8 connector protective cap |
| Role | Passive connector protection |
| Thread | M8 x 1 |
| Manufacturer article | 232224 in the supplied designation |
| Electrical circuit | None |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
1. Capture the installed record
Before ordering OLK02-M8 232224, photograph the nameplate and document what is connected on each side of the device. Check supply, signal or mechanical interface, mounting, environmental exposure and the receiving controller. The table is a compact technical reference for OLK02-M8 232224; a similar printed string can denote another function, rating or certification. Retain any parameter backup and the current drawing with the maintenance record.
2. Define the process duty
In operation, OLK02-M8 232224 is intended to protect an unused connector position. Establish the real input condition, the expected output response and the acceptance limit. Where an accessory, receiver, host card, reflector or magnet is required, include that matched part in the bill of materials. Do not infer that the picture or a neighbouring model code establishes compatibility for OLK02-M8 232224.
3. Install and prove
At installation, Verify the M8 thread, seal and environmental fit. Confirm power is isolated where required and compare the connector or terminals against the current manufacturer documentation for OLK02-M8 232224. Verify safe-area and hazardous-area boundaries where applicable; the exact certificate and site wiring govern the final decision. Leave enough clearance for the fitted cable and normal service access.
Commission OLK02-M8 232224 with an observable, known condition rather than only checking an indicator lamp. Record at least two input states and their controller responses, then test the edge of the real working range where practical. If OLK02-M8 232224 is part of a safety or Ex installation, use the site's approved proof-test procedure and exact approval documents. Save settings, photos and measured results so a later replacement can be compared reliably.
4. Send the purchase brief
A useful quotation request for OLK02-M8 232224 includes the full code, quantity, site function, connection type, any mating accessory and required approval. Ask the supplier to confirm every changed suffix on a proposed alternative. This page does not declare that other visually similar codes are interchangeable with OLK02-M8 232224; each requires its own data and fit review.
Visually related codes
The following model strings resemble OLK02-M8 232224 in print. They are collected for search and stock recognition only; electrical and mechanical functions can differ. Verify every complete designation independently.
No additional same-pattern designation is grouped with OLK02-M8 232224 in this selection.
Handover note
Keep the final OLK02-M8 232224 nameplate photo, fit check and test record with the machine file. Re-check the exact model whenever the host, process or installation environment changes.
