X20CM4810 selection record: four-channel vibration acquisition module and installed-system fit
X20CM4810 belongs to the B&R X20 automation system. Specify X20CM4810 by its complete designation and documented role; the visible similarity of two modules is not a compatibility decision.
Identification matrix
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | X20CM4810 |
| Inputs | 4 IEPE analog |
| Sampling | 51.5625 kHz |
| Resolution | 24-bit converter |
The values above identify X20CM4810 at catalog level. Verify the installed revision, label and current manufacturer manual before issuing a purchase order or approving a design change.
01 / Intended duty
For X20CM4810, Acquire machine vibration signals for condition monitoring with the sensor mounting and measurement band defined beforehand.
Capture the actual cabinet location, connected equipment, expected operating range and the consequence of a lost signal or network connection. These details turn the X20CM4810 code into a specific engineering requirement.
03 / Acceptance record
For commissioning X20CM4810, Check each sensor's baseline, excitation and recorded spectrum under representative machine conditions.
Record date, test conditions, observed LEDs or diagnostics and as-left configuration for X20CM4810. Restore normal control after testing and obtain the site's electrical or safety sign-off where required.
02 / Fit boundary
When replacing or adding X20CM4810, Verify IEPE sensor supply, cable shielding, sampling setup and analysis software. An ordinary process analog-input card is not equivalent.
Check X20CM4810 against the as-built wiring, X20 base, terminal block, supply module and controller software. Keep every accessory and revision difference visible in the RFQ; do not approve a look-alike solely from a photograph.
Code alternatives and exclusions
The references below, if any, share a relevant X20CM4810 code stem or functional family. Their ratings, ports, wiring or software may differ; they are not automatic replacements.
No additional exact-stem variant is assigned to X20CM4810 here; seek written manufacturer confirmation for any alternative.
Purchase handover
Quote X20CM4810 exactly, with quantity, required delivery, existing hardware revision and a readable label photograph. Attach the application drawing and network or channel map so the supplier can confirm the right product and accessories.
The buyer should retain a written fit decision for X20CM4810, and maintenance should keep the final settings and test evidence. Do not energize a replacement until the approved checks are complete.
