ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 application and verification brief
ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 represents SensyTemp TSP131 process temperature sensors for a defined industrial task. TSP131 uses a machined thermowell; its insertion and material choices cannot be inferred from another SensyTemp variant. The notes below separate confirmed family data from project-specific information that must be verified before an order or replacement is approved.
Technical identity and selection limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 |
| Product family | SensyTemp TSP131 process temperature sensors |
| Component role | temperature sensor with machined thermowell |
| Exact ABB order reference | tsp131.a1.z9.z9.f04.k1.z9.z9.z9.t1.k1.t1.b1.y1.c2.jz.u1.m5.t1 |
| ABB product series | SensyTemp TSP131 process temperature sensors |
| Sensor family | SensyTemp TSP131 |
| Thermowell | Drilled from bar stock; selected material and process connection vary |
| Configuration | Decode sensor, insertion length, transmitter and approval |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The technical table for ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 applies to the representative reference. Similar codes can differ in electrical rating, mechanism, approvals, terminal layout or installed accessories.
Procurement evidence
A purchase request for ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 should carry the complete order reference, equipment tag, quantity and any required revision. Compare process temperature, pressure, sheath material, length and sensor element. Ask the supplier to state deviations and included accessories before approval.
A close substitute for ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 needs a documented fit and function assessment. Keep separate the purchase of a complete device, a repair board, an installation accessory and a spare kit; each has different acceptance evidence.
Application boundary
The intended duty for ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 is to measure process temperature through a specified thermowell assembly. Define the actual process, panel or machine condition first. Verify whether the device is the active control element, a measurement interface, a protection component or a passive spare. That distinction controls the rest of the selection.
For ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1, describe the system requirement in terms of inputs, outputs, connected loads and environmental limits. The presence of a familiar ABB family marking is useful for finding documentation but is not a substitute for the complete configuration.
Failure modes to exclude
Before installing ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1, identify plausible wrong-part scenarios: altered suffix, incorrect voltage, different contact arrangement, incompatible process material or an omitted safety accessory. Any such difference should stop an automatic replacement decision.
For ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1, a visual match does not prove the same trip behavior, measurement accuracy or communication map. Use product marking and ABB documentation to resolve ambiguous entries rather than silently assigning a specification.
Electrical or process interface
Map the ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 terminals or process connections against the current drawing. Check supply limits, polarity, load category, signal range, protective earth, hazardous-area constraints or controller compatibility as applicable to this specific series.
The ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 interface review should include cable length, shielding, mounting clearance and service access. If software or firmware participates in the function, record the approved version and configuration backup.
Receiving and traceability
Compare the delivered ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 label with the approved quotation and original equipment record. Inspect packaging, connector condition, terminals, mechanical features and documentation. Isolate damaged or mismatched stock pending engineering review.
Record the ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 serial or batch information where available. Website category imagery is illustrative and must not be treated as proof of a particular shipped configuration.
Acceptance record
The acceptance record for ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 should identify the test conditions, measured result, person responsible and any remaining restriction. Include upstream and downstream interfaces, not just the component itself.
Retain the final ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 wiring or loop drawing, settings and verified order code. These records will make a future maintenance comparison faster and safer.
Installation sequence
Qualified personnel should install ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 under the plant's isolation and permit process. Confirm fit and wiring before energization. Configure only approved settings, and document any parameter changed from the baseline.
After ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 is fitted, compare reading with a traceable temperature reference. A healthy power indicator alone does not prove the complete connected function or safe-state response.
Related codes in the same concrete series
The following ABB codes are grouped with ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 for browsing and purchasing reference. They will not receive separate product pages. The group is not a list of interchangeable parts; compare each full marking and ABB documentation for its distinct rating or function.
- TSP131- YON1P3S05K1N1P1P1S1P2D1B2H4AZ-M5
- TSP131-Y0S1P3S05K1N1P1P1S1P2D1B2H4AZ-M5
- TSP131.Y0.S1.P2.F15.K1.N3.Z9.P1.S1.P5.S1.B1.Y1-.C4.C2..GHE...S1
- TSP131.Y0.S1.P2.F15.K1.N3.Z9.P1.S1.P5.S1.B1.Y1. -.C4.C2.C6.C9.CB.CE.CV..GHE.P3.V8.S1.UZ.M5.T1
- TSP131.Y0.S2.D1.Y00.K1.M2.Y0.D3.S1.P2.S1.B2.H6.AZ.C2.U2.M5.T1 AZ=0-150DEGC
- TSP131.Y0.S2.D1.Y00.K1.M2.Y0.D4.S1.P3.B2.B2.Y1(K1: EXTENSION TUBE LENGTH IS 150 MM)
- TSP131.Y0.S2.P3.S06.K1.N4.Z9 .Z9.S1.P2.B2.B2 .Y1- U1 U=260MM L=330MM
Approval point
Release ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 for purchase or use only when its full identity, duty, installation interface and acceptance test agree.
Keep the approved ABB TSP131.A1.Z9.Z9.F04.K1.Z9.Z9.Z9.T1.K1.T1.B1.Y1.C2.JZ.U1.M5.T1 evidence with the equipment record so a later replacement can be assessed against a known baseline.
