Installed-equipment notes for TF96-96
Keep the entire TF96-96 designation with the maintenance request. TF96-96 belongs to a specific equipment design; the visible family name alone is insufficient for a replacement decision.
Product data and selection limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | TF96-96 |
| Product family | TF96 |
| Component role | thermal motor overload relay |
| Setting range | 84-96 A |
| Trip class | 10 |
| Contactor fit | AF80 or AF96 |
| Order code | 1SAZ911201R1006 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For TF96-96, the table identifies useful checks but does not replace the marked unit and its complete technical documentation. Confirm option and revision details before purchase.
Equipment role
The installed role of TF96-96 is to protect a matched AF contactor and motor circuit from overload or phase failure. Write down the connected circuit, controller or process tag and the equipment being served.
A failure around TF96-96 may also arise from the supply, sensor, wiring, communications or mechanical accessory. Capture the symptoms before removing parts.
What the replacement must match
Before substituting TF96-96, compare motor nameplate, contactor frame, reset mode, contact wiring and coordination. Check the exact code and nameplate against the purchase specification.
Do not call another TF96 designation a direct replacement for TF96-96 solely because its enclosure looks similar. Ratings and fitted options require separate confirmation.
Field fault isolation
For an unexplained TF96-96 fault, note the present indicators and alarm history. Measure only at safe accessible test points according to the plant procedure.
When TF96-96 interacts with a controller or protective system, verify the upstream command and downstream response independently before deciding which component failed.
Commissioning handover
After fitting TF96-96, test trip and reset contact states. Record the test method, readings, settings and any open deviation.
Release TF96-96 for service only after the relevant protection, communication or measurement response has been witnessed and the asset record is updated.
Related family designations
These TF96 designations are included with TF96-96 to support model searches and enquiries. Individual specifications can differ, and they are not automatically interchangeable.
No other unassigned TF96 code is grouped with TF96-96 here.
Ordering record
Retain the TF96-96 nameplate image, purchase code and configuration note with the quotation. Include the commissioning results when the unit is installed.
If a future TF96-96 replacement is required, compare its complete code with the installed record again rather than relying on this page alone.
