Field selection notes for SH203-C10
SH203-C10 is a three-pole C-curve miniature circuit breaker for a defined industrial installation. When requesting SH203-C10, keep its complete printed designation, hardware revision and project context together so that purchasing and engineering review the same component.
Technical identification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | SH203-C10 |
| Product family | SH203 |
| Component role | three-pole C-curve miniature circuit breaker |
| Poles | 3 |
| Rated current | 10 A |
| Trip curve | C |
| Order code | 2CDS213001R0104 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The SH203-C10 data above identifies the published function and key selection checks. A rating or connection shared with another device does not establish an approved replacement for SH203-C10.
Where this item works
For SH203-C10, the intended duty is: Protect a three-pole branch circuit where the design specifies a C-curve 10 A breaker. Capture the actual connected load or signal, site environment and operating sequence before purchase.
The installation record for SH203-C10 should include a nameplate photograph, panel drawing and the failed unit's setting or software version when applicable.
Match the interface before ordering
The critical cross-check for SH203-C10 is: Confirm conductor size, fault level, upstream selectivity and permitted installation standard. A similar product outline, series name or current class alone is not enough.
Ask the supplier to identify any deviations from SH203-C10 in connection hardware, function, approvals and accessories. Resolve them against the engineering drawing before accepting a substitute.
Installation and return-to-service proof
For SH203-C10, the controlled acceptance method is: Verify pole isolation, labeling, wiring torque and the circuit test record. Record the actual results, not merely a pass/fail impression.
Before returning the equipment containing SH203-C10 to production, verify isolation, protective coordination, terminal identification and any interlock or safety-related response.
Same-series ordering references
These codes share the SH203 grouping with SH203-C10, but option strings can alter ratings, wiring, firmware or certifications. They are not automatically interchangeable with SH203-C10.
- SH203-C16
- SH203-C20
- SH203-C25
- SH203-C32
- SH203-C63
Buyer handover record
Quote SH203-C10 in full, state quantity and destination, and attach the relevant panel photograph and drawing. Confirm whether accessories are included in the offered supply.
At receipt, compare the supplied label with SH203-C10 and document any difference before installation. Retain the final part identity and the SH203-C10 acceptance test with the asset history.
