ABB S201M-C6: field fit and operating duty
ABB S201M-C6 should be specified as a complete device, not inferred from a similar family name. Its protection, control or measurement role must match the actual equipment and installation.
Technical data for model selection
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | S201M-C6 |
| Product family | S201M |
| Component role | single-pole S200M miniature circuit breaker |
| Poles | 1 |
| Rated current | 6 A |
| Trip curve | C |
| Order code | 2CDS271001R0064 |
| Class | S200M; check applicable breaking rating |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The stated S201M-C6 data identify the selected reference and its engineering boundaries. Confirm the unit label, applicable standard and exact options before ordering or energizing.
What must match
Check S201M-C6 against fault level, operating voltage, conductor, curve and accessory design. In procurement, ask for photographs or ABB documentation that show the complete designation and terminal configuration.
If the candidate S201M-C6 differs from the installed device, document the difference and obtain an engineering decision before fitment.
Design intent
The intended duty of S201M-C6 is to protect the specified one-pole control or distribution circuit. Mark the circuit, asset or process tag and preserve the plant drawing that governs this function.
Do not assume a different suffix within S201M provides the same duty as S201M-C6; ratings and accessory arrangements can differ.
Installation controls
Before working on S201M-C6, apply the approved isolation and permit controls. Capture the existing connections, settings and safety functions as a recoverable baseline.
Install S201M-C6 with the correct conductor, panel spacing and environmental protection. Follow the ABB instructions for the specific construction rather than using a generic wiring assumption.
Handover evidence
For S201M-C6, test wiring and the selected protection function. Record the measured result, witness and date beside the equipment tag.
Retain the final S201M-C6 designation, revision, settings and test outcome in the maintenance record so later work does not rely on memory.
Fault-finding baseline
For a future fault involving S201M-C6, keep records of upstream supply, load, trip or output state and connected accessories. This separates a device issue from a wiring or process issue.
A replacement S201M-C6 should be checked at the same duty point as the prior installation, with abnormal behavior investigated before return to service.
Related model references
The following S201M codes are indexed with ABB S201M-C6 for search and enquiry. They remain configuration-specific; this grouping does not assert electrical, mechanical or approval interchangeability.
- 2CDS271001R0164 S201M-C16
- 2CDS271103R0024, S201M-C2NA
- 2CDS271103R0104, S201M-C10NA
- 2CDS271103R0164, S201M-C16NA
- 2CDS271103R0204, S201M-C20NA
- 2CDS271103R0254, S201M-C25NA
- 2CDS271103R0324, S201M-C32NA
- S201M-B6UC
- S201M-D50
- S201M-K0.5UC
- S201M-K1UC
Enquiry checklist
Send the exact ABB S201M-C6 designation with circuit or plant tag, required rating, accessories and approval. Confirm current lifecycle and delivery scope.
On receipt of S201M-C6, compare label, package contents and documentation to the approved request. Hold any discrepancy for review before fitting.
