PSR45-600-70(1SFA896111R7000) in the installed application
The full PSR45-600-70(1SFA896111R7000) marking belongs on the enquiry and the receiving inspection. PSR45-600-70(1SFA896111R7000) is a compact two-phase motor softstarter whose suitability depends on the actual connected process, circuit or control project.
Technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | PSR45-600-70(1SFA896111R7000) |
| Product family | PSR45 |
| Component role | compact two-phase motor softstarter |
| Rated current | 45 A |
| Main voltage | 208-600 V AC |
| Control supply | 100-240 V AC, 50/60 Hz |
| Bypass | Built-in |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Read these PSR45-600-70(1SFA896111R7000) parameters together with the nameplate and the manufacturer's option data. The short family label does not establish every rating or installed accessory.
Application snapshot
The intended function of PSR45-600-70(1SFA896111R7000) is: Reduce the electrical and mechanical stress of the assigned motor start and stop. Record the real process or electrical duty and the equipment that sends or receives the signal.
For PSR45-600-70(1SFA896111R7000), note any site condition that changes selection: mounting position, ambient temperature, load profile, supply quality, hazardous-area conditions or the existing communication project.
How to prepare the replacement
Before working on PSR45-600-70(1SFA896111R7000), follow the plant's isolation or process-shutdown procedure. Photograph or record terminal positions, accessory parts, settings and current indications.
For PSR45-600-70(1SFA896111R7000), compare the delivered identification with the approved order. Fit only the required components and restore an approved backup rather than recreating settings from memory.
Questions for the quotation
Ask the supplier to confirm this PSR45-600-70(1SFA896111R7000) match: Match motor FLA, starting frequency, line voltage, overload coordination and starter controls. Attach the installed full code and relevant drawings to the enquiry.
A similar item is not automatically equivalent to PSR45-600-70(1SFA896111R7000). Ask for a written comparison of ratings, interfaces, terminals, dimensions, options and required firmware or settings.
What to observe on startup
The acceptance test for PSR45-600-70(1SFA896111R7000) is: Verify start/stop ramp, current and bypass transition with the actual motor load. Compare measured results and indications with the commissioning record.
If PSR45-600-70(1SFA896111R7000) forms part of a protective function, verify fault response and reset in addition to normal operation. Keep the final readings and sign-off with the maintenance file.
Other designations in this family
The following PSR45 codes are gathered with PSR45-600-70(1SFA896111R7000) for search and purchase enquiries. They can differ in sensor, coil, rating, pole count, communication or accessories. Check each complete code; they are not automatically direct replacements.
- 1SFA896111R7000 (PSR45-600-70)
Receiving checklist
When PSR45-600-70(1SFA896111R7000) arrives, compare the marked code, revision and included accessories with the order. Record any variance before the equipment is installed.
Retain the PSR45-600-70(1SFA896111R7000) technical document, inspection and commissioning result with the asset record so the next replacement can be matched accurately.
