Field checklist for ABB OXP12X395(1SCA022042R5990)
Start the ABB OXP12X395(1SCA022042R5990) enquiry with a precise equipment identity and a defined plant function. The verified values below establish a technical baseline; they do not replace checking the delivered unit.
Verified parameters and fit limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | OXP12X395(1SCA022042R5990) |
| Product family | OXP12X395 |
| Component role | 395 mm switch-disconnector operating shaft |
| Type | OXP12X395 |
| Order code | 1SCA022042R5990 |
| Shaft length | 395 mm |
| Cross section | 12 mm class |
| Application | Selected OT switch-disconnector and door handle |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Before signing off OXP12X395(1SCA022042R5990), check the current ABB documentation and the actual nameplate. Family-level information must not be used as a guaranteed option for every configuration.
What changes at installation?
Installing OXP12X395(1SCA022042R5990) may affect adjacent wiring, panel access and auxiliary accessories. Check clearance and isolate the correct energy sources under the site's permit system.
Before disturbing OXP12X395(1SCA022042R5990), save photos, configuration, parameter values and an alarm baseline. Keep removed parts identifiable until acceptance is signed.
What problem does it solve?
ABB OXP12X395(1SCA022042R5990) is selected to couple the switch mechanism to its enclosure handle. State the actual circuit, loop or motor tag and the operating problem before deciding on a replacement.
A request for OXP12X395(1SCA022042R5990) without site duty, installed revision or failure evidence can lead to a technically different part being offered.
Which interfaces must match?
For OXP12X395(1SCA022042R5990), confirm OT frame, cabinet depth, shaft cut length and handle. Compare the original label, mounting, field terminals and power/control supplies with the ABB product reference.
Keep the OXP12X395(1SCA022042R5990) electrical or network interface unchanged unless engineering has approved the revised drawing, settings and test scope.
What can cause a poor match?
A OXP12X395(1SCA022042R5990) suffix or order-code difference may identify another coil, contact set, protocol, release, shaft or voltage. A matching appearance is not interchangeability evidence.
If the supplied OXP12X395(1SCA022042R5990) differs from the approved item, quarantine it for review rather than changing field wiring to make it fit.
How is performance proved?
After approved installation of OXP12X395(1SCA022042R5990), check positive ON/OFF action and door interlock. Use only documented safe test methods and include connected equipment behavior.
Record the OXP12X395(1SCA022042R5990) as-left results, asset tag, revision, date and witness. Restore alarms, interlocks and normal control before service handover.
What should purchasing retain?
The ABB OXP12X395(1SCA022042R5990) record should include the complete designation, required accessories, label evidence and the current installation manual revision.
For any proposed substitute to OXP12X395(1SCA022042R5990), obtain written confirmation of every changed technical characteristic and the site's acceptance.
Other codes in this same series
The following OXP12X395 references can accompany an ABB OXP12X395(1SCA022042R5990) enquiry. Suffix changes can affect ratings, fit or approvals, so none is an automatic replacement.
No other unassigned OXP12X395 reference is grouped with OXP12X395(1SCA022042R5990) in this release.
Enquiry and acceptance handoff
Quote ABB OXP12X395(1SCA022042R5990) exactly, include the asset tag and duty, and request confirmation of any missing accessories or alternative build.
Keep the approved OXP12X395(1SCA022042R5990) comparison, installation checks and test results in the maintenance record.
