What to verify before ordering ABB OTP16T3M(1SCA022400R9910)
ABB OTP16T3M(1SCA022400R9910) selection begins with the exact device identity and its assigned function. The values in the following table are a starting point for checking the delivered unit, not a substitute for the nameplate.
Technical identification and decision points
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | OTP16T3M(1SCA022400R9910) |
| Product family | OTP-T3M |
| Component role | enclosed three-pole safety switch |
| Type | OTP16T3M |
| Order code | 1SCA022400R9910 |
| Poles | 3 |
| Duty | 16 A at AC-23A/415 V catalog rating |
| Enclosure | IP65 plastic |
| Auxiliary | 1 NO included catalog version |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Confirm ABB OTP16T3M(1SCA022400R9910) against the current ABB documentation and the actual plant duty. A range or capability from another variant must not be assumed for this exact build.
Equipment duty and scope
ABB OTP16T3M(1SCA022400R9910) is considered where the site needs to isolate a local machine circuit using an enclosed handle. Record the asset tag, circuit or loop boundary, and reason for the change before specifying a replacement.
The ABB OTP16T3M(1SCA022400R9910) procurement request should distinguish the physical device from any separate accessories, configuration files, protection devices and installation materials.
Interface evidence
Before ABB OTP16T3M(1SCA022400R9910) is ordered, compare load current, enclosure, cable glands, handle lockout and auxiliaries. Capture the installed nameplate, a clear terminal photograph and the cabinet drawing revision.
A visual resemblance to ABB OTP16T3M(1SCA022400R9910) is not proof of equivalent contacts, voltage, communication, release, connector orientation or certification.
Failure and mismatch review
If ABB OTP16T3M(1SCA022400R9910) was requested after a fault, document the symptom and tests that separated component failure from wiring, supply, configuration or upstream protection problems.
If the delivered ABB OTP16T3M(1SCA022400R9910) differs from the ordered complete designation, hold it for engineering comparison. Do not treat a family name as an interchangeability approval.
Work package
The ABB OTP16T3M(1SCA022400R9910) work package needs isolation, access, disconnection and restoration steps approved for this plant. Preserve the original wiring marks and any usable settings backup.
During ABB OTP16T3M(1SCA022400R9910) installation, verify adjacent equipment clearance and protective bonding without altering an approved design solely to fit a substitute.
Commissioning evidence
After fitting ABB OTP16T3M(1SCA022400R9910), test cover interlock and OFF isolation. Use the site's approved safe test procedure and observe all connected interlocks and indications.
Log the ABB OTP16T3M(1SCA022400R9910) serial or revision, test result, date, and witness. Restore normal operating mode only after the relevant process owner accepts the change.
Purchasing handoff
Quote ABB OTP16T3M(1SCA022400R9910) exactly and attach the current ABB reference alongside the equipment label. Ask the supplier to state any order-code, revision or accessory differences.
Keep a traceable ABB OTP16T3M(1SCA022400R9910) comparison with the installed part and require written approval for alternatives that change electrical or control behavior.
Related configurations in this series
These OTP-T3M references belong to the same product grouping as ABB OTP16T3M(1SCA022400R9910), but ratings and included parts can differ. Match the entire designation before treating one as a replacement.
- OTP25B3M 1SCA022383R2640
- OTP90T3M 1SCA022812R2970
Acceptance record
For ABB OTP16T3M(1SCA022400R9910), retain the final order code, supplied revision, installation findings and functional test evidence.
If ABB OTP16T3M(1SCA022400R9910) is rejected or substituted, keep the reason and the approved disposition with the asset record.
