ABB 018616-001 (LAMP,HALOGEN,30V,375W) replacement and fit guidance
ABB 018616-001 (LAMP,HALOGEN,30V,375W) is the exact ordering identity addressed here. ABB 018616-001 is identified in the supplied designation as a 30 V, 375 W halogen lamp. Confirm the marking and the equipment parts record before ordering. The category image is a shared reference image, not a photograph of the precise delivered configuration.
Key technical and selection data
| Technical item | Verified value / selection note |
|---|---|
| Spare-part code | 018616-001 |
| Description | Halogen lamp |
| Listed lamp voltage | 30 V |
| Listed lamp power | 375 W |
| Equipment fit | Confirm the original Measurex assembly and lamp holder |
For ABB 018616-001 (LAMP,HALOGEN,30V,375W), preserve the complete part designation during enquiry and receipt. The data above distinguish a confirmed item description from site-specific checks; they do not establish a universal replacement rating.
Where this part is used
ABB 018616-001 (LAMP,HALOGEN,30V,375W): The lamp provides the specified light source in a matched optical or measurement assembly; it is not a general-purpose panel indicator. Record the host equipment tag, serial number and current assembly drawing before purchasing a replacement.
The operating position of ABB 018616-001 (LAMP,HALOGEN,30V,375W) must be confirmed from the installed system. A similar-looking code or generic product image does not prove electrical, optical or mechanical equivalence.
Ordering and fit decision
For ABB 018616-001 (LAMP,HALOGEN,30V,375W), Check voltage, power, mechanical base, optical alignment, lamp envelope and the installed Measurex equipment revision. Do not infer lamp life or environmental rating from the part number. Capture the full code on the removed part and request confirmation for any proposed alternate.
Before releasing ABB 018616-001 (LAMP,HALOGEN,30V,375W) for installation, check whether the delivered item is a standalone part, a kit or a length of material. Ask for the actual package contents and required companion pieces.
Receiving and installation checks
Inspect ABB 018616-001 (LAMP,HALOGEN,30V,375W) for transit damage, legible identification and the correct revision. Compare its physical interfaces with the removed part without forcing a fit or changing approved protection.
For ABB 018616-001 (LAMP,HALOGEN,30V,375W), Allow the lamp to cool and isolate its supply before replacement. Handle the optical assembly under the equipment procedure and confirm light-source status after reassembly. Record the observed result and keep the order code with the maintenance history.
Replacement boundaries
ABB 018616-001 (LAMP,HALOGEN,30V,375W) should not be selected solely by a partial number. Ratings and compatibility absent from the verified description must be established from the equipment-specific ABB records.
If ABB 018616-001 (LAMP,HALOGEN,30V,375W) cannot be matched to the host documentation, hold installation and ask for an exact part-number cross-check. Approval of a substitute should be documented by the responsible engineer.
Procurement record
Quote ABB 018616-001 (LAMP,HALOGEN,30V,375W) in full, with quantity, host equipment and any installation constraint. Retain the supplier confirmation and final acceptance result.
