Selection file for ABB FMT452-A1R5G0BL2M5SC2T1
Use the complete ABB FMT452-A1R5G0BL2M5SC2T1 designation for the purchase and asset record. The short family mark alone cannot establish electrical ratings, process options or interchangeability.
Technical selection record
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | FMT452-A1R5G0BL2M5SC2T1 |
| Product family | FMT452 |
| Component role | advanced thermal mass flow transmitter |
| Family | SensyMaster FMT452 remote transmitter |
| Measurement | Thermal gas mass flow |
| Functions | Multi-application and gas-selection capability at family level |
| Options | Verify approval, housing, output and power from full code |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Values shown for FMT452-A1R5G0BL2M5SC2T1 are selection checkpoints. Confirm the fitted unit, nameplate and ABB documentation before releasing an order or a site change.
Fit and interface gate
Compare FMT452-A1R5G0BL2M5SC2T1 with the existing installation for matched flow sensor, application setup, gas, process conditions, approval and terminal configuration. Keep photos of the nameplate, terminals and accessory arrangement with the enquiry.
If any connector, protective rating or configuration item differs, hold the FMT452-A1R5G0BL2M5SC2T1 substitution for engineering review.
Installation sequence
Before fitting FMT452-A1R5G0BL2M5SC2T1, isolate the affected system by the plant procedure and preserve the approved settings or wiring schedule. Verify mechanical seating and each identified connection.
After connecting FMT452-A1R5G0BL2M5SC2T1, check power, communications and local indications before enabling the controlled equipment.
Application decision
The intended duty of FMT452-A1R5G0BL2M5SC2T1 is to run the configured FMT450 flow measurement and selected application profile. Record the controlled asset, panel location and circuit or process tag next to the exact code.
A specification for FMT452-A1R5G0BL2M5SC2T1 should state the operating conditions rather than assuming another FMT452 item is a drop-in replacement.
Acceptance evidence
At handover for FMT452-A1R5G0BL2M5SC2T1, check configuration backup and compare measured and transmitted flow at defined conditions. Record who witnessed the test, the measured results and any open action.
The FMT452-A1R5G0BL2M5SC2T1 asset record should retain the final configuration, revision and commissioning evidence for later troubleshooting.
Related configuration codes
Other FMT452 designations recorded with FMT452-A1R5G0BL2M5SC2T1 are shown below for search and enquiry. Their options and ratings can differ; the list does not claim automatic interchangeability.
No further unassigned FMT452 designation is grouped with FMT452-A1R5G0BL2M5SC2T1 on this page.
Purchase handoff
Quote the complete FMT452-A1R5G0BL2M5SC2T1 designation, the installation tag and the critical interface checks. Ask for nameplate and revision confirmation before dispatch.
When FMT452-A1R5G0BL2M5SC2T1 arrives, compare the received unit to the approved selection record and document the final acceptance result.
