Technical fit record for ABB DPMP-01
ABB DPMP-01 is indexed here as a specific buying and service reference. Confirm its complete designation before assuming that another family member has the same terminals, electrical duty or approvals.
Verified technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | DPMP-01 |
| Product family | DPMP-01 |
| Component role | flush control-panel mounting platform |
| Function | Remote drive panel flush mounting |
| Accessory | Panel mounting platform, not a drive |
| Related hardware | Check CDPI-01 and chosen control panel |
| ABB article | 3AUA0000108878 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table for ABB DPMP-01 separates verified family data from the configuration checks that still require a nameplate or ABB order record. Do not use a family rating as an unconditional guarantee for the installed unit.
Purchase decision
Specify ABB DPMP-01 against a particular asset tag and duty. This unit is used to mount an approved ABB drive control panel in a cabinet door; record the intended circuit, process or equipment location before requesting a quote.
For DPMP-01, confirm drive family, panel adapter, door cutout and cable path. A matching short family name is not sufficient evidence of electrical, mechanical or software interchangeability.
Commissioning evidence
For DPMP-01, confirm panel communication and mechanical retention. Carry out only the tests approved for this device and the connected installation.
Save the as-left settings, measured results, witness and work-order reference for DPMP-01. Any temporary bypass or inhibited alarm must be removed before normal operation.
Interface checklist
Before ordering DPMP-01, compare the installed terminal or connector arrangement, power source, mounting envelope and ancillary hardware with the current drawing.
Document the serial number and revision of DPMP-01 where available. If a supplier proposes a substitute, obtain engineering acceptance for every changed interface.
Receipt inspection
On arrival, compare the supplied DPMP-01 label and order code with the approved purchase description. Inspect packaging, terminals, seals and visible damage.
Do not install DPMP-01 when the shipped suffix, control voltage, release or approval differs from the approved build; resolve that discrepancy before commissioning.
Site preparation
Plan the DPMP-01 replacement under the facility isolation and permit rules. Preserve photographs, configuration files, settings and a diagnostic baseline before disturbing wiring.
Check enclosure temperature, grounding, segregation and protection coordination for DPMP-01. Record any accessory that is supplied separately rather than assuming it is in the device box.
Lifecycle handover
Keep ABB DPMP-01 linked to its exact spares description, drawings and current manual revision. This helps the next maintenance team identify the same configuration rather than a superficially similar item.
Review the first operating period of DPMP-01 for alarms, heating, drift or switching anomalies and update the asset record if the installed build differs from the original request.
Related configuration references
The following DPMP-01 codes are recorded with ABB DPMP-01 for enquiry. Suffixes may alter ratings, dimensions, approvals or accessories; these are not automatic replacements.
- 3AUA0000108878 DPMP-01
- DPMP-01 (3AUA0000108878)
Information to send with an enquiry
Quote ABB DPMP-01 exactly and include the asset tag, electrical or process duty, required accessories and delivery documentation.
For DPMP-01, request written confirmation of any deviation from the fitted unit before accepting an alternative.
