DCS800-S01-0125-05: DCS800 DC drive application and replacement review
DCS800-S01-0125-05 is a DCS800 DC drive. The technical data below separates documented family characteristics from ordering-code options that need verification on the actual unit.
Technical facts to verify
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | DCS800-S01-0125-05 |
| Type | DCS800-S01-0125-05 |
| Input RMS current | 102 A in ABB hardware table |
| Normal-duty DC output | 124 A |
| Standard-duty DC output | 111 A |
| Heavy-duty DC output | 104 A |
The data for DCS800-S01-0125-05 supports initial identification. For a purchase decision, use the actual nameplate and the manufacturer's documentation for the complete installed configuration.
Where this designation fits
For DCS800-S01-0125-05, Document motor armature current, field supply, speed feedback, braking and four-quadrant needs. DC drive selection differs from AC motor drive selection.
Record the operating duty, supply and field interfaces of DCS800-S01-0125-05. A same-family designation may still have a different electrical rating, connection, firmware or approval.
Related designations in the same product line
The following codes have a same-line relationship to DCS800-S01-0125-05. Their ratings and options can differ; they are references for an enquiry, not approved substitutes.
No additional exact same-line designation is shown here for DCS800-S01-0125-05. Do not assume a different product family is interchangeable.
Configuration gate before ordering
For DCS800-S01-0125-05, Compare line voltage, converter bridge, field excitation, cooling, duty and control-board options to the installed unit. Use the appropriate duty column, not the largest published number by default.
The RFQ for DCS800-S01-0125-05 should include the full designation, quantity, clear nameplate photo, revision, drawings and required delivery date. Request explicit confirmation of every proposed alternative.
Site acceptance and maintenance
For DCS800-S01-0125-05, Back up parameters, follow capacitor-discharge and lockout rules, then validate armature/field polarity, speed loop and protective trips before load release.
File the test record under DCS800-S01-0125-05 and keep the as-left wiring, settings and firmware with the asset history. Site safety procedures and the exact manufacturer's instructions govern the work.
Procurement handover
Use DCS800-S01-0125-05 consistently in the quotation, purchase order and maintenance record. Ask the supplier to state whether the offered item is the exact designation or a documented successor.
Before energizing DCS800-S01-0125-05, compare the supplied labels, accessories and approvals with the approved engineering documents. Retain the inspection and acceptance results for future service.
