Identify CR-M024DC4 before replacement
CR-M024DC4 is a plug-in miniature interface relay for a defined industrial installation. When requesting CR-M024DC4, keep its complete printed designation, hardware revision and project context together so that purchasing and engineering review the same component.
Technical identification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | CR-M024DC4 |
| Product family | CR-M024DC4 |
| Component role | plug-in miniature interface relay |
| Coil | 24 V DC |
| Contacts | 4 changeover |
| Output reference | 250 V / 6 A |
| Order code | 1SVR405613R1000 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The CR-M024DC4 data above identifies the published function and key selection checks. A rating or connection shared with another device does not establish an approved replacement for CR-M024DC4.
Installation and return-to-service proof
For CR-M024DC4, the controlled acceptance method is: Test coil pickup and each changeover contact with the final connected circuit. Record the actual results, not merely a pass/fail impression.
Before returning the equipment containing CR-M024DC4 to production, verify isolation, protective coordination, terminal identification and any interlock or safety-related response.
Where this item works
For CR-M024DC4, the intended duty is: Isolate and switch control signals through a suitable plug-in relay socket. Capture the actual connected load or signal, site environment and operating sequence before purchase.
The installation record for CR-M024DC4 should include a nameplate photograph, panel drawing and the failed unit's setting or software version when applicable.
Match the interface before ordering
The critical cross-check for CR-M024DC4 is: Confirm socket pinout, coil polarity, contact load, suppression and panel wiring. A similar product outline, series name or current class alone is not enough.
Ask the supplier to identify any deviations from CR-M024DC4 in connection hardware, function, approvals and accessories. Resolve them against the engineering drawing before accepting a substitute.
Same-series ordering references
These codes share the CR-M024DC4 grouping with CR-M024DC4, but option strings can alter ratings, wiring, firmware or certifications. They are not automatically interchangeable with CR-M024DC4.
No additional unassigned CR-M024DC4 code is recorded here for CR-M024DC4.
Buyer handover record
Quote CR-M024DC4 in full, state quantity and destination, and attach the relevant panel photograph and drawing. Confirm whether accessories are included in the offered supply.
At receipt, compare the supplied label with CR-M024DC4 and document any difference before installation. Retain the final part identity and the CR-M024DC4 acceptance test with the asset history.
