1SVR360663R1001 CP-C.1 24/10.0: load budget and DC distribution
ABB 1SVR360663R1001 CP-C.1 24/10.0 is a DIN-rail power supply rated 24 V DC, 10 A and 240 W. Its order code should remain attached to the type designation when checking a replacement or designing a control-power branch.
Technical data for identification
| Technical item | Verified value / selection note |
|---|---|
| ABB order code | 1SVR360663R1001 |
| Type designation | CP-C.1 24/10.0 |
| Output voltage | 24 V DC |
| Rated output current | 10 A |
| Rated output power | 240 W |
| Mounting | DIN-rail switch-mode supply |
| Input and options | Confirm line range and fitted accessories on exact data sheet |
For a low-voltage control or protection device, distinguish its stated function from the other devices in the feeder. Confirm supply, load category, wiring diagram, upstream coordination and required local approvals.
Where this configuration fits
1SVR360663R1001 CP-C.1 24/10.0 should be assessed in the actual equipment arrangement. Build a load budget for PLC, I/O, sensors, relays and any startup surges, with reserve for cabinet temperature and future loads. Decide which downstream branches require their own fuse or electronic protection.
A request for 1SVR360663R1001 CP-C.1 24/10.0 should identify the host system, process or motor duty, available supply and the expected normal and fault behavior. This makes the selection review specific to the installed equipment.
Related configuration references
The following 1SVR360663R1001 CP-C.1 24/10.0 family references are identification aids. Ratings, options and approvals can differ; each complete designation needs its own review.
- 1SVR360663R1001
Order-code and compatibility review
For 1SVR360663R1001 CP-C.1 24/10.0, Confirm the actual AC input range, DC adjustment, status output, mounting clearance and any redundancy or buffering accessories against ABB's exact product data. Multiple CP-C.1 current ratings share a family name but not the same power budget.
Before substituting 1SVR360663R1001 CP-C.1 24/10.0, compare the complete label with the engineering drawing, ABB configuration data, installed accessories and site approval record. A partial designation or a similar enclosure cannot establish interchangeability.
Information to send with a replacement inquiry
Provide the exact model 1SVR360663R1001 CP-C.1 24/10.0, quantity, serial or revision, application conditions, required connection and approval, and a legible nameplate photograph. Ask for confirmation of accessories and any approved successor.
Keep 1SVR360663R1001 CP-C.1 24/10.0 in the asset register and maintenance record as the exact search phrase. Record who approved the selected device, what was tested and whether the installed configuration differs from the base family specification.
Field checks and acceptance
Commissioning of 1SVR360663R1001 CP-C.1 24/10.0 should follow a controlled procedure. Isolate the input, check protective earth and polarity, and verify output voltage under representative load. Test DC OK indication and record the measured load current, branch protection and control-power diagram.
Capture the as-left settings, test points, abnormal-state response and revision of 1SVR360663R1001 CP-C.1 24/10.0. Include photographs of its nameplate and terminal arrangement so the next service event can be traced.
Final engineering decision
Approve 1SVR360663R1001 CP-C.1 24/10.0 only when the verified ratings and ordered options match the equipment record. Resolve every discrepancy in code, connection, supply, firmware or process limit before energizing the system.
The published family values for 1SVR360663R1001 CP-C.1 24/10.0 support identification and initial selection. The device nameplate, matching ABB instructions and the site's approved design determine final suitability.
