CI857K01 application and acceptance notes
CI857K01 is the complete reference for this INSUM Ethernet communication package. Use the exact code, not only the family name, when reviewing a replacement or preparing an enquiry. The final site decision depends on the installed circuit and the marked hardware revision.
Technical identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | CI857K01 |
| Product family | CI857K01 |
| Component role | INSUM Ethernet communication package |
| Interface | INSUM Ethernet communication |
| Package | CI857 interface plus TP853 baseplate |
| Order code | 3BSE018144R1 |
| System | AC 800M / System 800xA integration |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
These CI857K01 details establish the selection baseline. Check the unit label and current ABB documentation for any option or approval that is not explicit in the technical table.
Duty at this site
For CI857K01, the expected duty is: Link the AC 800M controller to its INSUM motor-management communication system. Identify the source, the connected equipment and the permissive or alarm logic before ordering.
A useful handover record for CI857K01 includes the drawing reference, ambient condition and the operating duty. This helps distinguish a genuine equivalent from a merely similar-looking device.
Before energizing
Inspect CI857K01 and its connected wiring under the approved isolation procedure. Compare the delivered code with the order, then check mechanical seating, terminals and required accessories.
Restore only reviewed settings for CI857K01. If the original assembly contains safety or protection functions, follow the plant's dedicated validation plan before operating the load.
What proves it works?
For CI857K01, the acceptance action is: Verify network diagnostics, motor data exchange and intended alarm/command mapping. Record the actual observed result, not only the power-on indication.
Retain a signed record of the CI857K01 test together with faults, corrections and the final nameplate information for later maintenance and procurement.
What must match?
The critical CI857K01 comparison is: Check package contents, baseplate, Ethernet addressing, controller software and INSUM project mappings. Confirm each difference with the supplier and the site engineer before approving it.
Document the terminal arrangement, supply, protective coordination or communications mapping relevant to CI857K01. An alternative code can require a changed parameter set, mounting layout or approval.
Codes grouped with this model
Other CI857K01 codes are listed here for search and procurement reference. Their suffixes may change the coil, ratings, channel layout, interfaces or accessories, so they are not declared interchangeable with CI857K01.
There is no additional unassigned CI857K01 designation grouped with CI857K01 here.
For the purchase enquiry
State the full CI857K01 code, installed machine or panel, quantity, required condition and delivery destination. Ask for a matching datasheet and the supplied hardware revision.
If CI857K01 is offered as a substitute or updated spare, request a written cross-reference covering mechanical fit, wiring, ratings and required project changes before approval.
