ABB CE4T-10R-02 (1SFA619550R1051) field identification and technical fit
ABB CE4T-10R-02 (1SFA619550R1051) is documented here as an exact equipment reference for selection, changeover and service. Confirm the full label and application before treating another code as equivalent.
Technical data and selection boundary
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | CE4T-10R-02 (1SFA619550R1051) |
| Product family | CE4T |
| Component role | red twist-release emergency-stop operator |
| Type | CE4T-10R-02 |
| Order code | 1SFA619550R1051 |
| Head | Red 40 mm mushroom |
| Release | Twist release |
| Contacts | 2 normally closed |
| Illumination | Non-illuminated |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The verified ABB information for CE4T-10R-02 (1SFA619550R1051) is shown above. Values tied to a series or catalog configuration still need to be checked against the supplied unit and its current documentation.
Asset match
ABB CE4T-10R-02 (1SFA619550R1051) should be matched to a specific asset tag, duty and installed hardware revision. Record why the part is needed and capture a clear nameplate image before requesting an offer.
For CE4T-10R-02 (1SFA619550R1051), the order description is only one checkpoint. The approved drawings and actual installation determine which connection, control and protection details must be retained.
Functional role
Use CE4T-10R-02 (1SFA619550R1051) to provide a safety-control stop input in the approved circuit. Confirm the operational sequence and the equipment connected to it so a superficially similar series member is not accepted as an automatic replacement.
If CE4T-10R-02 (1SFA619550R1051) is part of a safety, motor or process control function, review the complete system response rather than checking the isolated component alone.
Interfaces to compare
Before ordering CE4T-10R-02 (1SFA619550R1051), verify safety design, contact arrangement, mounting and reset policy. Compare terminals, mount, supply, accessories and revision with the installed unit and current ABB documentation.
An alternative to CE4T-10R-02 (1SFA619550R1051) should not be released until the engineering owner has documented each changed interface and the required approval.
Removal and preparation
Prepare the work around CE4T-10R-02 (1SFA619550R1051) using the site's isolation, lockout and permit rules. Save settings, wiring photographs and diagnostics before removing the existing item.
For CE4T-10R-02 (1SFA619550R1051), reserve the necessary panel space, access to terminals and any separately ordered shaft, base, connector or protection accessory.
Receipt and identification
At receipt, compare the shipped CE4T-10R-02 (1SFA619550R1051) label, suffix, order code and hardware build with the approved purchase request. Inspect for handling damage and missing accessories.
Hold CE4T-10R-02 (1SFA619550R1051) from installation if coil voltage, release, fiber type, contact arrangement or approval differs from the intended specification.
Commissioning evidence
After installing CE4T-10R-02 (1SFA619550R1051), validate both NC paths and the machine safety function. Use the manufacturer's procedure and a site-approved test plan; do not energize a connected load simply to identify an unknown variant.
Record the as-left settings, test observations, date and approver for CE4T-10R-02 (1SFA619550R1051). Remove any temporary bypass and restore normal alarms before handover.
Handover and spares
File the ABB CE4T-10R-02 (1SFA619550R1051) purchase identity with the asset record, drawing revision and maintenance notes. This keeps future enquiries tied to the actual installed configuration.
Monitor CE4T-10R-02 (1SFA619550R1051) during its first operating period for unexpected trips, heating, I/O faults or abnormal switching and resolve deviations through the normal change process.
Same-series reference codes
The following CE4T codes can be raised with an ABB CE4T-10R-02 (1SFA619550R1051) enquiry. Different suffixes can change ratings, contacts, approvals or fit; do not assume interchangeability.
No additional unassigned CE4T code is grouped with CE4T-10R-02 (1SFA619550R1051) at this time.
Request-for-quote details
Quote ABB CE4T-10R-02 (1SFA619550R1051) exactly, with the asset tag, installed label, required quantity and commissioning constraints. Ask the supplier to state any deviation explicitly.
Keep the final CE4T-10R-02 (1SFA619550R1051) approval and inspection record with the plant spare-parts file.
